All in one Stihl bar adapter.

[Homelite410]

be nice to have one for my solo 603

[email protected] is my PayPal address.

 

[Homelite410]

Is there anybody on here that has a 3120 that I could get to measure over the bar studs. I have a potential customer that is asking if one of these adapters will fit on the 3120 and I would really like to tell him yes.

Thank you in advance!

 

[o8f150]

[email protected] is my PayPal address.

you actually have one for the solo 603 going to a stihl mount???,,, I would be more then happy to get one for sure then

 

[Homelite410]

you actually have one for the solo 603 going to a stihl mount???,,, I would be more then happy to get one for sure then

Yes it should according to Oregon the 603 is a d009 mount.

Please remember this is for the 12mm stihl mount.

 

[o8f150]

Yes it should according to Oregon the 603 is a d009 mount.

Please remember this is for the 12mm stihl mount.

yep,, it is a large huskie mount but the studs are closer together then a huskie,,, the bar I am using is a stihl mount 36" bar

 

[Homelite410]

It should work just like this.

 

[o8f150]

I bought the huskie to stihl adaptor on line,,, I had to have the whole center milled out for it to work,,,, it did look just like that one,,,,, the bar studs are about 1/4" closer together then the huskie bar studs are

 

[mdavlee]

The adapters are nice and work on the dolmars and other huskies with different bar spacing.

 

[Homelite410]

Hows this 08

Top is husky to 12mm

Middle is solo 694 dolmar 9010 to 12mm

Bottom is the ones I make!

 

[Homelite410]

The adapters are nice and work on the dolmars and other huskies with different bar spacing.

Thank you Mike!!

 

[mdavlee]

No problem. It's nice to not have to modify it to work on all different models.

 

[o8f150]

Hows this 08

Top is husky to 12mm

Middle is solo 694 dolmar 9010 to 12mm

Bottom is the ones I make!

just now got on since the site went down again,,,,, I think the bottom one is the one I need,,, I sent you an email about it,,,,, send back through email the info on it and details for payment just incase site goes down again

 

[038mag]

Great idea and you will be rewarded!!!

I have 1050 and 650 both for a pattern thank you though.

how do i purchase one of your spacers for a dolamr 120 and 120 super?

 

[Homelite410]

[email protected] is my PayPal address. Or check or money order will be fine too. Between sales and the Christmas thread, and I am currently out of them and it will take me about 3 or 4 days to get some more made.

 

[SawTroll]

Hows this 08

Top is husky to 12mm

Middle is solo 694 dolmar 9010 to 12mm

Bottom is the ones I make!

I like the bottom one, but maybe it is a little longer than really needed?

 

[Homelite410]

I like the bottom one, but maybe it is a little longer than really needed?

If it was any shorter than you could not use it on a husky...................

 

[SawTroll]

If it was any shorter than you could not use it on a husky...................

OK, but in the picture it looks longer than the Husky specific one - maybe just an optical illution?

 

[Eccentric]

OK, but in the picture it looks longer than the Husky specific one - maybe just an optical illution?

Looks to me like the bottom one is shifted over to the left compared to the top one. Look at the right side and left side edges of both. Also, it appears that the camera was closer to the bottom piece than the top piece, and that would give the optical illusion that you're suggesting.

 

[SawTroll]

Looks to me like the bottom one is shifted over to the left compared to the top one. Look at the right side and left side edges of both. Also, it appears that the camera was closer to the bottom piece than the top piece, and that would give the optical illusion that you're suggesting.

I believe you are right - all is well then!

 

[Homelite410]

OK, but in the picture it looks longer than the Husky specific one - maybe just an optical illution?

Honestly I thought you were just stirring da pot!