I used brake cleaner on it something I seen on another post put it all back together and now starts first pull.
Amazed someone would through it away in the trash.
The cup does seem a bit worn but For now its working.
That saw was really made well.
Thank you for your response
chris.
Use no oil on the fiber washers. When working correctly, the magic fingers should extend with a 1/4 turn of the recoil pulley. Sharpen the end of the dogs with a file at about a 45 deg. angle. Chuck the cup up in your vise and prick punch every 1/16-1/8 inch around the inside. You want to displace enuff metal to reduce the inside diameter.