I'm off into a different realm today..plumbing! Faucets dripping so decided to replace cartridges in bathroom and kitchen. Not dripping at least for now..If parts come today I'll be back into chainsaw repair, a little more interesting..
It'll be interesting to see how you join the roofs together, keep us posted..I really just wanted to tie into the top of the wall, but I needed additional height.
Doors are next. The entire front has to open. I'm simply using sheets of siding, framed on the back with 2x3 to save hung weight. I bought 4 1/2" commercial hinges. I hope the don't sag too much.
After that, I'm replacing all the pine trim that's painted white with cedar trim. Most of it is rotted out after only 10-12 years. Then fresh paint and shingles on the new part.
View attachment 524351
View attachment 524357
View attachment 524352 View attachment 524354
What do the case look like ? Paint or powder ?
Sent from my iPhone using Tapatalk
I haven't figured that out yet, lol. I currently have 30# felt paper slid up under the bottom shingle about 6".It'll be interesting to see how you join the roofs together, keep us posted..
Trim the ears off and re-use the original.Now just waiting for new intake to come in so I can put on metal clamp.
The kind of roofing you have on the original part is kinda stiff and doesn't lend itself to bending very much. The only thing I could think of is to put a piece of metal flashing in the V part, run the original down to the V and proceed from there with the original type roofing and don't spare the roof cement where it's joined together! I've done a little roofing but that certainly isn't my profession, maybe someone will come up with something better..I haven't figured that out yet, lol. I currently have 30# felt paper slid up under the bottom shingle about 6".
This one salvaged from a fire, runs awesome. I have all parts to make look new but I've just been running it. It has character .My first Stihl project is on my bench. Its a pristine 028 WB. It's not mine though. It's a friend's saw he asked me to get it running again. Probably just fuel line and a carb kit is all it needs. A beautiful machine.
I have a donor with pooched p&c and other problems but great cosmetically. But it's nice as is banging around in tractor and skid steer.I have lots of saws with "character" I can't afford character-less saws yet.
That appears to be an awfully nice looking table to be doing mechanic work on..I know what my wife would do if she came in and saw something like that on her table!
Enter your email address to join: