doubletrouble
ArboristSite Operative
I am thinking of deleting the base gasket from my chainsaw. Is there an average or standard thickness to these gaskets? I measured the squish (by inserting solder through the spark plug hole and checking it that way) and I have .033 now. I loosely measure the case gasket with a digital caliper and it measured .019 so if the base gasket is of the same thickness wouldn't that bring the piston to close to the top of the cylinder if I were to delete the base gasket? if I understand correctly the desired squish is in the area of .020
Thank for any replies
Thank for any replies