Bigger Dogs on my 361 !!!
- Thread starter kevinj
- Start date
Help Support Arborist Forum:
GASoline71
Mr. Nice Guy
Stihl makes a kit with a roller chain catcher for the 361. They are not as large as fallin' dogs on a 440 or a 460... but they are better than the stocker on there...
I'll look up the number for ya...
Gary
I'll look up the number for ya...
Gary
GASoline71
Mr. Nice Guy
Here's the number for ya...
Item: 1135 650 7750
Desc: Chain Catcher Kit
...and here are a couple of pics installed on my saw.
Gary
Item: 1135 650 7750
Desc: Chain Catcher Kit
...and here are a couple of pics installed on my saw.
Gary
GASoline71
Mr. Nice Guy
Here is a snapshot of one of the pages of the directions for installation.
Gary
Gary
Trigger-Time
Addicted to ArboristSite
My set for 361 should be here tomorrow along with a set for
my 440.
my 440.
My set for 361 should be here tomorrow along with a set for
my 440.
Are you gettin the same kit that GAS was talkin about ???
Trigger-Time
Addicted to ArboristSite
sILlogger
Addicted to ArboristSite
Here's the number for ya...
Item: 1135 650 7750
Desc: Chain Catcher Kit
...and here are a couple of pics installed on my saw.
Gary
Great Scott Gary!!! You've got a half-wrap!!! mingling with the dark side...glad to see it!
You can run the bigger dogs than the set pictured too. I have the big Stihl ones on my 361. Now I just need to find a 3/4 wrap handlebar for a decent price as the Stihl one is $175.00 incl tax. BTW I use my 361 in pine a fair amount with a little fir, some redwood and oak too. The big dogs allow alot more rotation and stand the saw off and let it run a little cooler.
Lakeside53
Stihl Wrenching
Damn-it Gary.... I told you they'd notice!!!
you are hearby sentenced to spend one day in CA..
you are hearby sentenced to spend one day in CA..
chad3
ArboristSite Operative
show me the numbers....
Post up the numbers for the dawgs will ya....
chad
Post up the numbers for the dawgs will ya....
chad
sILlogger
Addicted to ArboristSite
well he does have skip chain...i guess that is a start!!
Lakeside53
Stihl Wrenching
Not $175.... Try $138... msrp.. for the entire kit of 3/4 handlebar, big side cover, dogs, springs, etc.. or $89 for the handle alone..
Here's the number for ya...
Item: 1135 650 7750
Desc: Chain Catcher Kit
...and here are a couple of pics installed on my saw.
Gary
So Gary,
By the looks of it,
there's a couple holes to be made in the side cover. (passenger side)
Anything more than that ???
Do the holes match up on the drivers side of the bar ???
GASoline71
Mr. Nice Guy
Damn-it Gary.... I told you they'd notice!!!
you are hearby sentenced to spend one day in CA..
I know... I know... however, that is my "limbing" saw. LOL...
I don't do much fallin' with it anymore... so it just has the stock handle on it.
Gary
The instructions are easy. You need to drill the nut bosses on the side cover and the reast bolts right on.
IMO this is one of the best options available for a current saw.
They do work great!!!
Last edited:
GASoline71
Mr. Nice Guy
The directions even tell you what size drill bit to use. EZ-PZ!
Gary
Gary
The instructions are easy. You need to drill the nut bosses on the side cover and the reast bolts right on.
IMO this is one of the best options available for a current saw.
They do work great!!!
I noticed that...
I just wondered about the drivers side.
If there were any additional holes to be made there.
But I guess NOT.
Thanks guys.
