I think I have isolated the problem on my 200T. I vac tested the case at 20 inches of Hg, no movement on the dial. (Gorilla duct tape does work!
)
The impulse hose looks fine, is very flexible. I did not repalce the spark plug, but it seems to surely be a fuel problem. The carb is a China-made:angry2: Zama 616A, a model identified by Lake as likely having a bad carb body and needing replacement.
Question is, 1. Can i replace this crab, I mean, carb, with a different one, perhaps by another mfg.?
2. Where should I look to obtain said carb? Mucho gratitudino.
Oh, BTW, I learned the hard way not to try to split the muffler to clean out the carbon..........I broke off three of the four bolts holding it together, and it still wouldn't come apart. Grrrr
The impulse hose looks fine, is very flexible. I did not repalce the spark plug, but it seems to surely be a fuel problem. The carb is a China-made:angry2: Zama 616A, a model identified by Lake as likely having a bad carb body and needing replacement.
Question is, 1. Can i replace this crab, I mean, carb, with a different one, perhaps by another mfg.?
2. Where should I look to obtain said carb? Mucho gratitudino.
Oh, BTW, I learned the hard way not to try to split the muffler to clean out the carbon..........I broke off three of the four bolts holding it together, and it still wouldn't come apart. Grrrr
Last edited: