E.V.A. Sawman
ArboristSite Operative
Just acquired a 2153 WH with a case seal leak Saw will run fine then foul the plug, you can see a lot of heavy oil deposit in exhaust port, I then checked the bar oil tank and you could see and smell the oil was contaminated with fuel. Has anyone else had this problem?
Also where can I go to to find a part ipl as we don't have a Jonsered dealer close, and will the 346xp seals, and case gaskets be the same, or if someone has the part numbers for the crank seals, case gasket, and cyl base gasket it would be much appreciated. I phoned the nearest jonsered dealer but they have no time to look up the parts unless I drop off the saw. Saw is only about a year old and I got it for a good price, any help would be greatly appreciated.
Also where can I go to to find a part ipl as we don't have a Jonsered dealer close, and will the 346xp seals, and case gaskets be the same, or if someone has the part numbers for the crank seals, case gasket, and cyl base gasket it would be much appreciated. I phoned the nearest jonsered dealer but they have no time to look up the parts unless I drop off the saw. Saw is only about a year old and I got it for a good price, any help would be greatly appreciated.