Cutting close to ground

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

knotty niv

New Member
Joined
Dec 29, 2009
Messages
1
Reaction score
0
Location
Canada
Is there 1 saw that works better doing the final cut at ground level. I find my saw becomes dull very quick doing this cut.
 
It is not the saw as much as the chain/dirt interface. Dirt is death to cutting edges. The lower portion of a tree can have dirt lodged in the bark that will dull your chain quickly. The best solution is to get used to touching up with a file after stumping.

Some types of chain dull more quickly than others - full chisel tends to dull more quickly when it hits dirt than semi-chisel for example.
 
I like to chop/scrape the bark off if possible

and then it is mostly clean wood. Just getting the loose stuff off will help. Exhaust also lbows dirt and dust onto the b/c and that gets dragged into the cut. lay a piece of heavy canvas tarp at base of tree and that will keep the dust down, and will also collect chips.
 

Latest posts

Back
Top