damaged piston/cylinder? husqvarna 254xp

[MartDalb]

a set? ^^ should be just one right?

Made the order, 4$ won't make a diff. at this stage

 

[Adam08ski]

Is it just a single spring loop? Couldn't remember off the top of my head. Spending money on saws becomes a problem. I try and find issues or modifications just so I can by more bits...

Sent from my HTC One M8s using Tapatalk

 

[MartDalb]

http://www.ebay.com/itm/Clutch-Spri...224002?hash=item27df3fc942:g:llEAAOxy69JTCQoW

Should be this one.

Adam08ski, I am with you there.....but it's so worth it.
When I spend too much money on my projects, I buy a used saw, clean it, make it run, and sell it again for minor profit...95% of the time its a Stihl MS180, 250 or 260 or the likes.
And here I am...using a Husqy 254xp for my own, tell me I am doing something right here....

 

[Sepia]

Does your saw have the 2 shoe clutch or the 3 shoe?

 

[Sepia]

This is the spring for the 3 shoe clutch. http://www.ebay.com/itm/NEW-REPLAC-...628983?hash=item5b119e9337:g:6~8AAOSwv0tVTAP8

 

[Sepia]

This is the spring for the 2 shoe clutch. http://www.ebay.com/itm/Clutch-Spri...049ff3a&pid=100623&rk=1&rkt=2&sd=171249224002

 

[Adam08ski]

http://www.ebay.com/itm/Clutch-Spri...224002?hash=item27df3fc942:g:llEAAOxy69JTCQoW

Should be this one.

Adam08ski, I am with you there.....but it's so worth it.
When I spend too much money on my projects, I buy a used saw, clean it, make it run, and sell it again for minor profit...95% of the time its a Stihl MS180, 250 or 260 or the likes.
And here I am...using a Husqy 254xp for my own, tell me I am doing something right here....

You are, really good power to weight. It will trounce those 260's..

Sent from my HTC One M8s using Tapatalk

 

[Mattyo]

I forgot the clutch needle bearing one day....had a hell of a time figuring out what was wrong. Hit the chainbrake...shouldn't stall the motor.

If it does...something is binding too much.. the spring keeps the shoes seated at idle. ...so they don't engage until you hit the gas
If the spring is worn...it'll engage at a lower rpm..