sirstanesq
ArboristSite Lurker
Hey all long time lurker here. Recently acquired a straight gassed sthil ms 361 that is in GREAT shape for being burned up. Pretty familiar with two cycle engines, and chainsaws in general, but have never rebuilt a saw before. I have already replaced the piston & cylinder (with a big bore kit) as well as the flywheel, ignition module and fuel pickup. I have checked the fuel line, as well as the impulse hose and they are clear and in good shape (no cracks) I have tore the carb apart and cleaned it inside and out (and it looks brand new). My issue is that it doesn't run right at all. I can get it started if its WOT and it runs, but it won't idle at all. It won't start unless its WOT. Any other suggestions before I take it to a mechanic? thanks!