sawbones
Addicted to ArboristSite
It's fine that he asked. Asking every 18 minutes or so in the same thread is a bit much...
Not sure where he "heard" that 155 PSI was a low reading for these saws either. He was asked that and didn't answer. In a PM to me he asked me if 155 PSI was a low reading and if the saw needed rings because of it. Hadn't gotten a chance to answer his PM before his multiple posts in this thread...
While we're asking..................I could use a set of the thick #55537 rings for my XL903.
no go on the 903 rings, rechecked the part nubers cause sometimes one size ring will have several numbers for it possibly due to a part number system change.
regardless of needing the rings now or later a real collector will lay up exxxxxtra stuff for a rainy day.:hmm3grin2orange:
I know some fellers that already have a dozen of one model that would buy a dozen more for the right price.:cool2:
Speaking of real collectors, Just got back from the county dump. There was a day when I woulda
dived in a saved these two 12's from the jaws of death but already have enough Homey's piled up around here now.