So I'm trying to find a bar mount chart that not only lists dimensions but also which saws used that pattern. I've been on the chainsaw collectors corner and they have a great page of different mounts/patterns with pictures and dimensions but no specifics about what saw manufacturers and saw models used each pattern. I'm mostly looking for husqvarna info but there are quite a few bars out there that are somewhat "interchangeable" so in general I would just like to have a list if such a thing exists.
I'm looking for a bar mount chart
- Thread starter JNap
- Start date
Help Support Arborist Forum:
If you go to OREGON brand products, chain saw chain and guide bars, accessories, and mower blades for homeowners you can look up the Oregon catalog and find there bar mount chart there.
Perfect, thank you!
Couldn't find the mount chart
Sorry, but I found everything else listed there but the mount specs. The page says check with your local dealer. Did I miss where to look?
What I want to do is put a 3/8 setup on a Husky 51. I have a chain from several years ago for another saw that I never used. I also already have the sprocket so I just need to know what bar will cross reference. I see several listed for 55 Rancher (3/8x.358x68DL) and others but haven't been able to find which ones would have the small mount.
Thanks,
Richard
PS- Any recommendations on $-$$ bar values would also be appreciated.
Sorry, but I found everything else listed there but the mount specs. The page says check with your local dealer. Did I miss where to look?
What I want to do is put a 3/8 setup on a Husky 51. I have a chain from several years ago for another saw that I never used. I also already have the sprocket so I just need to know what bar will cross reference. I see several listed for 55 Rancher (3/8x.358x68DL) and others but haven't been able to find which ones would have the small mount.
Thanks,
Richard
PS- Any recommendations on $-$$ bar values would also be appreciated.
Try this link..., unless it's the one you already investigated.
OREGON® Hand Held Chain Saw Replacement Parts
Not exactly a chart, but certainly provides the Oregon options. Perhaps you could cross-ref that info to the Acre's site to find what you're looking for.
But if I'm not mistaken, the 50~55 Huskys will all have the "small mount" bar pattern regardless of a .325 or 3/8 setup.
OREGON® Hand Held Chain Saw Replacement Parts
Not exactly a chart, but certainly provides the Oregon options. Perhaps you could cross-ref that info to the Acre's site to find what you're looking for.
But if I'm not mistaken, the 50~55 Huskys will all have the "small mount" bar pattern regardless of a .325 or 3/8 setup.
Last edited:
SawTroll
Information Collector
It will, Oregon K095 = "small Husky".
That is one of the most common mounts, used by many saw brands.
SawTroll
Information Collector
Yes, but why "homeowner" and not "professional"?
At least with the "bar and chain selector", it is important to choose "professional", to get the best info (search results)...:msp_wink:
Maybe this link will help;
Chain Saw Collectors Corner Bar Mount Patterns
Chain Saw Collectors Corner Bar Mount Patterns
Warped5
WingNut
It's also worth noting that the Oregon catalog can be downloaded from their Web site.
The bar mounts shown are actual size, so you can take your bar and determine pretty quickly which mount is yours.
The bar mounts shown are actual size, so you can take your bar and determine pretty quickly which mount is yours.
Why homeowner?
Why not, the OP was looking for a bar mount chart, not a selector guide like this other poster is and that's where I found the chart online to make it easy for him to find.
SawTroll
Information Collector
Why homeowner?
Why not, the OP was looking for a bar mount chart, not a selector guide like this other poster is and that's where I found the chart online to make it easy for him to find.
OK, but the catalog is the same either way! :msp_biggrin:
