Friend of mine gave me an old saw to tinker with and see if I can get er goin. All the pieces are there and looks fairly simple. I noticed one flaw. A wire was used to pull the choke and seems that the wire was close enough to the stop switch, probably grounding out often. Compression seems too easy going as it doesnt have that tug tug but not too loose and also makes a klang noise with every revolution. Havnt pinpointed where thats coming from yet. I guess my question is, are these saws usually easy to pull and does someone know the proper way of adjusting the carb? Im sure all the idle and air screws were messed with.