Jonsereds 670 champ replacement
- Thread starter briar
- Start date
Help Support Arborist Forum:
Depends on which parts.......not all are a direct swap. But the closest Husky is the 268XP....
You are perhaps a generation or two of Jonsered models to early to be thinking near identical saws to their orange cousins- that did not really happen until the 21** series Jonsereds and the 3** series Husqvarna's and even then there are subtle differences in some parts- mainly the front wrap handles and chain brake assemblies.
Yeah it's an near endless circular bit of info as to what model's part fit what other models parts.......and some parts/systems will only fit if you have all the other parts to swap.......like if you change from a red fuel tank to an orange one.....which will bolt right up but you must use the top handle that goes with the orange tank....or vice versa...so it's not so cut and dried as one would wish.....they are different....
If you are after specific parts- ask here, there are a few Jonsered fans kicking about that are sure to have some spare bits- if they know what you might be after.
I learned alot in the jred board here. There was someone there that explained to me how there was so many variation on 670.
Just went through that on a champ redo too.
and dont 
to much.
She is a fun runner now.
Just went through that on a champ redo too.
and dont to much.She is a fun runner now.
