Let's Start a Muff Mod Thread

[CoreyB]

Here is a video a some asked for on the stihl 192 /192t

 

[Greenthorn]

I just finished modding my 261, did the muffler and the timing advance, thanks Mike from the WKY GTG and mastermind.

I also dremeled out the baffle.

 

[bikemike]

View attachment 429132 I did this to my 298xp, haven't done any timed cuts or anything, but it seems to run well, but here's my issue now, i'm building an alaskan mill for this saw, and would like to use a silencer i have off a kx100. There's no way i can mount it now without blocking off one of these outlets, so here's the question, is the can necasary at all, or could i simply build a manifold and pipe straight off the exhaust port and into the silencer? Anybody tried this? I would like quieter for milling, and also to direct exhaust away instead of straight at the log. Not looking for big gains, just not a big loss. I guess just trying might be my best option. Any thoughts?View attachment 429132

like that? This is a 25cc weed whip on a longboard I wanted it quiter and I achieved it with a home built glass filled silencer

 

[briantutt]

390 huskyView attachment 448869


Sent from my iPhone using Tapatalk

Pics of it "in process"?


Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[lucky_dad01]

Pics of it "in process"?


Sent from my SAMSUNG-SM-G920A using Tapatalk

Didn't do it myself, the guy that built the saw did it. Sorry.


Sent from my iPhone using Tapatalk

 

[Stihlsmoking]

Best muff mod ever! A little hairy but? The hole is perfect!!

 

[Stihlsmoking]

I didn't do it myself.
But damn I'd love to run some wood in it or run it through some wood or well you know what I mean.

 

[Deleted member 83629]

I'm possibly going to possibly muffler mod my husqvarna 545 i thought about bending back the deflector and either drill a five eighths or three quarter inch hole in the outlet.

 

[KenJax Tree]

I'm possibly going to possibly muffler mod my husqvarna 545 i thought about bending back the deflector and either drill a five eighths or three quarter inch hole in the outlet.

If you have a Dremel tool its easy to make a small hole for the bit and then open everything up the deflector. But a drill bit will work too

 

[Homelite410]

Here is my latest ms360 I believe for lowvolt.

volt.

This was my first mod with a screen. And I retained stock opening and screen.

 

[Homelite410]

Here is a 5105 I vowed to never do again. I used the cover as the front of the muffler and then black hi temp powder coated the ss muffler.

 

[zwoehr]

Here is a 5105 I vowed to never do again. I used the cover as the front of the muffler and then black hi temp powder coated the ss muffler.

Very cool. I kind of like the unpainted look though. Reminiscent of an old works type expansion chamber.

Sent from my VS985 4G using Tapatalk