mopar969
ArboristSite Operative
Just bought a Power Mac 6 for 5 dollars locally. I did not know if it would start took it home put 40:1 in it turned on no problem. The thing has not been turned on in at least 10 years or more. I wanted to know if anyone has the user manual or service manual for the saw? I was able to find the parts manual online.
Since it has been sitting for a while what should I do to make sure it will last a long time for me. It looks like it has been used moderately. It cam with a case and the guy must have used it regularly because there were two files in it a depth gauge and another chain and spark plug with the original 14 inch bar that still has some of the wording on it. I tell you what this thing is built nice and heavy steel compared to the cheap plastic stuff now. I just want to know if I should clean or check or put oil in the plug hole etc.. before using it let me know. Thanks
Since it has been sitting for a while what should I do to make sure it will last a long time for me. It looks like it has been used moderately. It cam with a case and the guy must have used it regularly because there were two files in it a depth gauge and another chain and spark plug with the original 14 inch bar that still has some of the wording on it. I tell you what this thing is built nice and heavy steel compared to the cheap plastic stuff now. I just want to know if I should clean or check or put oil in the plug hole etc.. before using it let me know. Thanks