Mower runs poorly then fixes itself?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
MagraAdam

MagraAdam

ArboristSite Operative
. AS Supporting Member.
Joined
Apr 20, 2020
Messages
303
Location
Tasmania
Hi guys. I've got a Victa pace 300 running a B&S engine. Had it for about 8 years and it's never missed a beat. It did residential yards for me, and now it does bits the ride on can't get on my farm. It'll cut through a lot! Recently it's been running super rough when I start it, then it somehow fixes itself and is fine. Sometimes turning it off and on makes it run better I it won't fix itself on the first go.

Any ideas? Video below

 
GoBigRed

GoBigRed

ArboristSite Operative
Joined
Jul 3, 2021
Messages
139
Location
western washington
Some carbs have a governor that Is moved by a magnet and engine RPMs. They can get stuck and drag for a while until the engine warms up and the throttle can get pulled open all the way. Hence the issue of running poorly at start up and then running correctly after a while.
Those carbs are very tolerant, but not perfect, when it comes to oxygenated gas and getting plugged up. So check that governor lever before buying a new carb as the fix may not cost you anything.
 
grizz55chev
Joined
Dec 9, 2010
Messages
21,709
Location
northern calif., around auburn
Hi guys. I've got a Victa pace 300 running a B&S engine. Had it for about 8 years and it's never missed a beat. It did residential yards for me, and now it does bits the ride on can't get on my farm. It'll cut through a lot! Recently it's been running super rough when I start it, then it somehow fixes itself and is fine. Sometimes turning it off and on makes it run better I it won't fix itself on the first go.

Any ideas? Video below


It's always the carb! 10 min fix.
 
anlrolfe

anlrolfe

Honor GOD, Country and Corps
. AS Supporting Member.
Joined
May 10, 2013
Messages
2,453
Location
Kentucky
It's nice how these slide off the round intake manifold.
If you dislodge the o-ring trying to slide it back on you can create a major air leak. It was tricky to get the ring back into the groove in the carb. Lessons learned. All in all, these come off so easy I'd start here without a second thought. Getting this right means you've got at least 1-known good to build from if you're troubleshooting.
 
thenne1713

thenne1713

ArboristSite Operative
Joined
May 24, 2008
Messages
487
Location
Memphis
Hi guys. I've got a Victa pace 300 running a B&S engine. Had it for about 8 years and it's never missed a beat. It did residential yards for me, and now it does bits the ride on can't get on my farm. It'll cut through a lot! Recently it's been running super rough when I start it, then it somehow fixes itself and is fine. Sometimes turning it off and on makes it run better I it won't fix itself on the first go.

Any ideas? Video below


FIRST THOUGHT IS fuel QUALITY; son had similar experience when he borrowed mower from me, bought his own gas can, bought gas, brought mower back saying not running right; I said water in fuel, he replies, but I just bought it... to which I responded "you bought it with water in it". I poured into a quart jar, and drained off fuel, leaving water in jar; all good.
 
MagraAdam

MagraAdam

ArboristSite Operative
. AS Supporting Member.
Joined
Apr 20, 2020
Messages
303
Location
Tasmania
FIRST THOUGHT IS fuel QUALITY; son had similar experience when he borrowed mower from me, bought his own gas can, bought gas, brought mower back saying not running right; I said water in fuel, he replies, but I just bought it... to which I responded "you bought it with water in it". I poured into a quart jar, and drained off fuel, leaving water in jar; all good.
Nah, the fuel is fine. No issues in other devices and this has happened with multiple refills from multiple Jerry cans.
 
Chevboy0167
Joined
Nov 28, 2020
Messages
1,509
Location
Iowa
Same engine and carb setup on a friends push mower. Wouldn't start or run, just popped 1 or 2 times. I yank carb off, tear it down only to find this white gelatinous chunks clogging up every orifice. Pulled gas cap off to find the same chunks mixed with the fuel.

Never found out where or how the crap got in there but cleaned entire fuel system, re-installed and runs like new. I gotta say that was an easy carb to clean up. Everything snaps together like freakin Legos! LOL
 
MagraAdam

MagraAdam

ArboristSite Operative
. AS Supporting Member.
Joined
Apr 20, 2020
Messages
303
Location
Tasmania
So, I pulled the filter housing off and found out the engine hose wasn't attached. So that's back on now. I also filed the choke lever to stop it sticking, but it still runs poorly when I start it. Knowing a little more this time I took the air filter off and poked the choke and it ran really well. So it's obviously still sticking. I might try and lube it up.
 
Top