Hi all
Newbie to fourm here
I've manged to get my self a job lot of 10 ms200t with the intention of carrying out repairs to sell on. 6-7 have good compression so I'm starting with those.
Im not too faimialr with 2 strokes/chainsaws so I'm hoping you guys may be able to point me straight.
Parts, I'm after bars, chains and various ms200t specific parts such as chain sprocket covers, fuel lines, av mounts maybe even crank seals etc.
Best place I've found so is L&s engineers? Any others I should try?
Crank play, I've found end play in the cranks on all the saws, is there a maximum measurement?
I've also found slight up and down play in the cranks (only checked on clutch side), how much is allowed?
Vac and pressure testing, I've got myself a cheap vac bleeding kit and the stihl adapter that fits in place of the carb, I've never done this before so any advice appreciated.
Value, whata the value of a vac tested, good compression saw these days?
And finally, carbs. I've jumped the gun a bit here and got two Chinese carbs, any one have experience here?
Sorry for the wall of text, I've got a lot of questions haha
Kyle
Newbie to fourm here
I've manged to get my self a job lot of 10 ms200t with the intention of carrying out repairs to sell on. 6-7 have good compression so I'm starting with those.
Im not too faimialr with 2 strokes/chainsaws so I'm hoping you guys may be able to point me straight.
Parts, I'm after bars, chains and various ms200t specific parts such as chain sprocket covers, fuel lines, av mounts maybe even crank seals etc.
Best place I've found so is L&s engineers? Any others I should try?
Crank play, I've found end play in the cranks on all the saws, is there a maximum measurement?
I've also found slight up and down play in the cranks (only checked on clutch side), how much is allowed?
Vac and pressure testing, I've got myself a cheap vac bleeding kit and the stihl adapter that fits in place of the carb, I've never done this before so any advice appreciated.
Value, whata the value of a vac tested, good compression saw these days?
And finally, carbs. I've jumped the gun a bit here and got two Chinese carbs, any one have experience here?
Sorry for the wall of text, I've got a lot of questions haha
Kyle