MS201T - Flywheel problem / 200T compatibility

[Stihl dude]

So I ****ed up,

I tried advancing the timing on the 201tc-m and completely filed the key.

The saw now idles but will not hold a full throtle, or start or idle right.

I presume its because the flywheel is destroyed? See picture

Will a flywheel from a 200T fit and work with the 201TC-M ?

Cheers

 

[DND 9000]

No the MS 200T flywheel will not fit the MS 201TC-M.

But you should still be able to use the original flywheel if you get it seated and thightened properly.

 

[Vintage Engine Repairs]

You don’t need a key in this instance. It’s just to give you your timing. Rotate the flywheel slightly retarding the timing and the flywheel will work just fine still.

 

[sawfan123]

And use a torque wrench.