malk315
Running Saws for Therapy
Today's Update!
How it works - for each $10 donated you get your name entered into the pot. For example: $100 = 10 entries/chances/name thrown into the fish bowl.
End date/drawing - To be entered into the drawing/raffle. You must have your donations in by midnight August 19th. The drawing will be done Aug 20th or shortly after.
Donations - donations can be done via paypal or if you'd like to send a check/cash please contact myself Eric @malk315 or @Paragon Builder Dan. The paypal address (use Friends and Family please to avoid fees) is [email protected] PLEASE PLEASE include your AS username and real name in the NOTE section of your donation (and nothing else, paypal may have a hissy if they find out its for a raffle)
PRIZES!!! special thanks to those who have donated prizes!!!
1. Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
2. Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
3. Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @czed from O P E site
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
6. Husky 262XP rebuilt and work ready with optional port work (winners choice) from @Paragon Builder
7. Muffler mod by @MillerModSaws (you send muffler to Carl, @svk will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk
8. Makita/Dolmar DCS6421 saw -- see pictures in thread on O P E site from @astnmacgto
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures on O P E site. 38-35" waist with 32" length.
10. Woods port from Mastermind Worksaws. @El Moobs
11. Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready from @Poleman Pictures are in the post on AboristSite.[/QUOTE]
12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains. from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @MillerModSaws
15. Custom built benchmount chainsaw vise from @mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. from @Dahmer
How it works - for each $10 donated you get your name entered into the pot. For example: $100 = 10 entries/chances/name thrown into the fish bowl.
End date/drawing - To be entered into the drawing/raffle. You must have your donations in by midnight August 19th. The drawing will be done Aug 20th or shortly after.
Donations - donations can be done via paypal or if you'd like to send a check/cash please contact myself Eric @malk315 or @Paragon Builder Dan. The paypal address (use Friends and Family please to avoid fees) is [email protected] PLEASE PLEASE include your AS username and real name in the NOTE section of your donation (and nothing else, paypal may have a hissy if they find out its for a raffle)
PRIZES!!! special thanks to those who have donated prizes!!!
1. Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315
2. Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.
3. Port job by @tree monkey
4. NOS Total Super Bar 20" Husky small mount from @czed from O P E site
5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84
6. Husky 262XP rebuilt and work ready with optional port work (winners choice) from @Paragon Builder
7. Muffler mod by @MillerModSaws (you send muffler to Carl, @svk will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk
8. Makita/Dolmar DCS6421 saw -- see pictures in thread on O P E site from @astnmacgto
9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures on O P E site. 38-35" waist with 32" length.
10. Woods port from Mastermind Worksaws. @El Moobs
11. Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready from @Poleman Pictures are in the post on AboristSite.[/QUOTE]
12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains. from @GCJenks204
13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman
14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @MillerModSaws
15. Custom built benchmount chainsaw vise from @mycamaro_68
16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. from @Dahmer