Work Saw Collector
GTG Coffee Maker
Heres some more
Man My fast saw drew a crowd. :hmm3grin2orange:
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Man My fast saw drew a crowd. :hmm3grin2orange:
Hedgerow
HACK
We all wanted to see which would finish first... The saw??? Or the cigarette???
:after_boom:
benp
Addicted to ArboristSite
andydodgegeek
The stool maker
Les (logging22) running my bad a$$ new toy!
James running in the fastest saw of the gtg race
Little Stumpys going at it
Les and Kim doing a little husband wife competition
andydodgegeek
The stool maker
The head to head races are way more fun than racing a stop watch
Some more little Stumpys
Me running my 041
That John deere was a handfull
atvguns
Addicted to ArboristSite
I went yesterday and picked up the sausage for the next GTG anybody else getting ready yet:msp_thumbup:
andydodgegeek
The stool maker
I want one of these
Sarah kicking my a$$ with my own saw
Kim kicking my a$$ with my own saw
Kim running my 2101xp
Stumpys Customs
Stumpbroke
Nope, just thinkin of you.:hmm3grin2orange:
Hedgerow
HACK
I sure am glad Andy has a lot of pics and stuff... Cause I failed miserably this go-round...
:big_smile:
:big_smile:
Dave Boyt
ArboristSite Guru
More photos
I've got a bunch of photos on photobucket.com. You're all welcome to view/download any photos. PM me if you want me to email you a higher res version.
2012 Spring GTG pictures by dboyt54 - Photobucket
Got home with the sawmill in one piece. A fellow even followed me when I pulled off for gas, and asked me just what the heck it was. A half-hour, later he knew more than he wanted to about sawmills.
Had a great time-- I brought home a Husq 2100 (might be a 2101, Stumpy wasn't sure) for my chain saw mill.
I've got a bunch of photos on photobucket.com. You're all welcome to view/download any photos. PM me if you want me to email you a higher res version.
2012 Spring GTG pictures by dboyt54 - Photobucket
Got home with the sawmill in one piece. A fellow even followed me when I pulled off for gas, and asked me just what the heck it was. A half-hour, later he knew more than he wanted to about sawmills.
Had a great time-- I brought home a Husq 2100 (might be a 2101, Stumpy wasn't sure) for my chain saw mill.
Work Saw Collector
GTG Coffee Maker
A good saw will finish at the same time. :hmm3grin2orange:
Pic test. Yep it worked Dave's pic.
<a href="http://s1238.photobucket.com/albums/ff490/dboyt54/2012%20Spring%20GTG/?action=view&current=GTG_751.jpg" target="_blank"><img src="http://i1238.photobucket.com/albums/ff490/dboyt54/2012%20Spring%20GTG/GTG_751.jpg" border="0" alt="Photobucket"></a>
I'll bet I sharpin a chain for my 460 just like the one in the Pic throughing chunks. Then I'll have another doller on that 460. :greenchainsaw:
Last edited:
Hedgerow
HACK
The dollar races are a hoot!!! But I didn't get to spend all my dollars!!! I wasn't ready... Only got to run 2...
:cry3:
I just turned around for a moment, and it was ON LIKE DONKEY KONG!!! Just had to grab old ugly and run for the cant!!!
Work Saw Collector
GTG Coffee Maker
<a href="http://s1238.photobucket.com/albums/ff490/dboyt54/2012%20Spring%20GTG/?action=view&current=GTG_789.jpg" target="_blank"><img src="http://i1238.photobucket.com/albums/ff490/dboyt54/2012%20Spring%20GTG/GTG_789.jpg" border="0" alt="Photobucket"></a>
Stumpys Customs
Stumpbroke
The dollar races are a hoot!!! But I didn't get to spend all my dollars!!! I wasn't ready... Only got to run 2...
:cry3:
I just turned around for a moment, and it was ON LIKE DONKEY KONG!!! Just had to grab old ugly and run for the cant!!!
No excuses, I had time to run the 390xp with a 28'' 7pin then switch it to a 20" 8 pin. Got the same time with both setups.
Old ugly done it's job though didn't it???
It was alot of fun.
Work Saw Collector
GTG Coffee Maker
I would like to add that Baconchuck'r Solo was a hoot to run.
Hedgerow
HACK
No excuses, I had time to run the 390xp with a 28'' 7pin then switch it to a 20" 8 pin. Got the same time with both setups.
Old ugly done it's job though didn't it???
It was alot of fun.
I lost my scrench!!!
And yes it did!!!
Stephen is in soooo much trouble come October!!!
Work Saw Collector
GTG Coffee Maker
Don't make me put a carb kit and new set of rings in this 029 for stomping on other members with. :msp_tongue:
Stumpys Customs
Stumpbroke
I would like to add that Baconchuck'r Solo was a hoot to run.
That thing is a beast, but I don't think it was runnin up to par this weekend. :msp_ohmy: It felt much stronger in KY.
Work Saw Collector
GTG Coffee Maker
Congrats on a successful Spring GTG!
The success ratio remains perfect.
Given the fact that the powers to be endorse our traditional Fall site, I will be accepting reservations at this time. As usual, First come, first served.
This year we have electric service on the South side of the lake, for executive camping.
The appropriate date appears to be Oct 19 etc. PROVIDED this does not interfere with Les's timber event.
Rvalue
WSC
ATVGuns
Hedgerow
sawnami
this spot reserved for someone that never shows.
Hank Chinaski
jerrycmorrow
wendell
Stumpy
Freehand
Dave Boyt.
Wknd Lumberjack
Bump
This GTG is getting close
Just post in this thread to get on the list.
Last edited:
Def. in.
