Want to Trade Oregon and Stihl bars to trade

[Brandon owenby]

I've got around 20-30 12-20" stihl oem homelite OEM, and Oregon bars. I'll have a list up hopefully by tomorrow afternoon. Many of the bars I've painted so that they would not rust and some I've sprayed decals on. I'm looking for a TS 400 crankcase. Muffler for 242 or that will fit. 181 sprocket cover, top cover. 266se starter assembly, top cover, muffler. 242 top cover sprocket cover and cylinder. NOW I APOLOGIZE ABOUT MY WRITING I WILL GET THE REST OF THE BARS ON THERE AND MAKE A MUCH CLEANER COUPLE PAGES BUT THEY'RE GOING QUICK HERE ARE THE PART NUMBERS SOME THE BEST I COULD GET

 

[Brad Burnette]

I've got around 20-30 12-20" stihl oem homelite OEM, and Oregon bars. I'll have a list up hopefully by tomorrow afternoon. Many of the bars I've painted so that they would not rust and some I've sprayed decals on. I'm looking for a TS 400 crankcase. Muffler for 242 or that will fit. 181 sprocket cover, top cover. 266se starter assembly, top cover, muffler. 242 top cover sprocket cover and cylinder

Looking for an 18 or 20 in bar for Stihl ms390.

 

[Brandon owenby]

I believe that I have a 20" rollamatic

 

[Brandon owenby]

I'll take a picture when I get back home tomorrow

 

[Brad Burnette]

Ok thanks

 

[billyboy]

Looking for 18" stihl 3003 mount .325 .063, or oregon D025 mount with .325, .063. Just good used for a resale project I'm working on. Cheaper is good , Good used chain would also work. 505821 Thanks

 

[Brandon owenby]

Looking for 18" stihl 3003 mount .325 .063, or oregon D025 mount with .325, .063. Just good used for a resale project I'm working on. Cheaper is good , Good used chain would also work. 505821 Thanks

Not too familiar with mount types but I have way too many bars so I'm sure I'll have one could you tell me what it's going on or how in comparison it might be against a 028 wb

 

[billyboy]

Not too familiar with mount types but I have way too many bars so I'm sure I'll have one could you tell me what it's going on or how in comparison it might be against a 028 wb

Yes, for an 028 WB, 50581 correction, thanks

 

[Overkill338]

How about an 18", 0.050" gauge 3/8LP or Picco? Would be a Stihl 3005 mount. Should fit MS251 and down.

 

[Brandon owenby]

Yes, for an 028 WB, 50581 correction, thanks

Yeah I got you on this one I'll shoot you a picture when I get home in the morning I believe I have a Stihl and a Oregon

 

[Brandon owenby]

How about an 18", 0.050" gauge 3/8LP or Picco? Would be a Stihl 3005 mount. Should fit MS251 and down.

Yeah Im sure that I have one but it may be a Oregon bar tho

 

[Overkill338]

Yeah Im sure that I have one but it may be a Oregon bar tho

Oregon is fine, how much for one?

 

[Brandon owenby]

Oregon is fine, how much for one?

$15-$20 bucks? Plus the ride. Is that fair?

 

[bulletpruf]

Do you have anything for 070/090 or 084/088? These would be the 3001 and 3002 mounts.

thanks

 

[Brandon owenby]

Ok all I have that will fit a 028 is a 16" .325 30030006813 . Another 16" 30030006813 a 20" oreg .325 203slgd025 and a rollamatic 20" 3/8 30030006117 that's what I have for what the 028 mount fits I need to kinda have a for instance on the other but I have like 30-40 bars most 18 and 20 sorry I didn't have that 18

 

[Brandon owenby]

Looking for 18" stihl 3003 mount .325 .063, or oregon D025 mount with .325, .063. Just good used for a resale project I'm working on. Cheaper is good , Good used chain would also work. 505821 Thanks

I've got a Oregon 20" and a 16" Stihl but no 18"

 

[billyboy]

I've got a Oregon 20" and a 16" Stihl but no 18"

Ok, i'LL HAVE TO THINK ON IT, Really want an 18 Thanks

 

[Brandon owenby]

Yes, for an 028 WB, 50581 correction, thanks

Yeah I have 2-3 different .325 Stihl 028 mount bars a 14, 16, and a 20" as well

 

[Matt_Ellerbee]

Yeah I have 2-3 different .325 Stihl 028 mount bars a 14, 16, and a 20" as well

Any lightweight bars? 3/8 .050?

3003 is Stihl mount 024-066
D025 is the Oregon code for the 024-066

3005 is Stihl for top handles,polesaws and most all homeowner stuff.
A074 is Oregon code for them.

 

[Eric howes]

Got a 16" bar for a husqvarna 372?