I guess it's kind of hard to draw fuel to the carb when the fuel line in the tank is like this.
P41
- Thread starter flatsfisher
- Start date
Help Support Arborist Forum:
and it oils great.
Nice work p41s cut pretty good with a 28” bar and a skip tooth chain
was thinking about 24 or 25". the 16 on it seems kinda small.
dawg needs flipped over
24's good on them
24's good on them
It has an adjustable oiler so if you are running a short bar, you should set it to minimum output.
I thought that looked odd. thanks.
yeah, way too much but at least it works well, unlike some other brands. will probably go to a 24" bar.
the only real ugly on this saw.
so, the final touch (unless maybe a longer bar and chain).
dog flipped over.
24" bar with the Stihl RS chain. Have one on my p-40, nice combo.
Now you have a good one. I bought mine new when Pioneer was clearing out their inventory, still use it today and have a 24" bar if needed. Wish it had a full wrap handle.
Now you need a few more.
Now you need a few more.
nice collection. I saw a used full wrap handle on ebay but it was 45 bucks. said it was for P series.
I was going to go with a 24" bar but this popped up on marketplace. hope it's not too long for this saw.
gumneck
Addicted to ArboristSite
Per the Acres website, you're right on the money at 28"
You can run the 28" in semi chisel fine on the P41 , I have for years . I actually run a 36" Carelton semi skip on my P51 in large White & Red pine , no oiling issues in either case although I always run winter grade bar oil !
finally received my 28" facebook marketplace Windsor bar for the P41. have googled al the numbers on the bar but I need to order a chain and I can't find the number of links I need. it's 28", 3/8 pitch and .058 gauge. how do I figure this out?
