pioneer 1074 oil adjustment?

[rocketnorton]

is it adjustable on this saw? is oiling, has original bar. just curious... new to me last w/e. tia.

 

[Modifiedmark]

No, not if I remember right its not.

 

[stihlavarna]

the one I had did not, but it did supply sufficient oil.

 

[rocketnorton]

thanks, couldn't find one, just makin sure it wasn't right in front of me... like a lot of other things I "look" for...

 

[Little Al]

is it adjustable on this saw? is oiling, has original bar. just curious... new to me last w/e. tia.

The 1074 oil pump is non adjustable, according to my Pioneer book of words, back in the days of manufacture, the colder the weather the thinner the oil to be used, they state oil between sae10&30 should be used, 10 for temps below 0f,-18c, Med sae20 between 0f /50f, -18/+10c, & heavy sae30 at over 50f 10c, At temps below -10 mix l pint of kerosene, diesel, or fuel oil to 1 gallon of sae10 oil. the same instustions seem to hold good for the P21.P26,& P28,

 

[rocketnorton]

The 1074 oil pump is non adjustable, according to my Pioneer book of words, back in the days of manufacture, the colder the weather the thinner the oil to be used, they state oil between sae10&30 should be used, 10 for temps below 0f,-18c, Med sae20 between 0f /50f, -18/+10c, & heavy sae30 at over 50f 10c, At temps below -10 mix l pint of kerosene, diesel, or fuel oil to 1 gallon of sae10 oil. the same instustions seem to hold good for the P21.P26,& P28,

thanks, good to know. hardly ever freezes around here, now that I said that...