Poulan S6000 bar

[mel4638]

Hi I have 2 Poulan S6000s which i think are Dolmar 152s . I am looking for a bar for a spare . The bar i have is 37" from end to end , 14 mm stud slot , 404 pitch , 063 guage and a roller tip . Anyone know where I might purchase a bar like that ? It could be an inch shorter or longer .

 

[pioneerguy600]

Your nearest Stihl dealer should be able to fix you up. Price wise the Stihl ES bars around here are about the best bang for the buck.

 

[mel4638]

I tried stihl, husqvarna , and cannon , no luck .

 

[Modifiedmark]

Hi I have 2 Poulan S6000s which i think are Dolmar 152s . I am looking for a bar for a spare . The bar i have is 37" from end to end , 14 mm stud slot , 404 pitch , 063 guage and a roller tip . Anyone know where I might purchase a bar like that ? It could be an inch shorter or longer .

The S6000 saws are actually a 153 but used a 152 crank and sprocket setup, just sayin..

As to the bar, your seeking a roller tip, not a sprocket tip correct? If your looking for a long roller tip bar, good luck in your search. Those are hard to find, and highly sought after as well.

A large 14mm slot Stihl bar for like a 070 and others will work on your saw but may need just a bit of modification to work right.

 

[mel4638]

I am sorry , a sprocket tip not a roller will do . I will look at the stihl 070 bars . If I can modify I will be happy . Thanks

 

[leeha]

Any of the large mount Stihl bars that fit the 084, 088, MS880, 075, 076, 090, 070, will work with very little mods.