Remington Chainsaws(including Mall chainsaws)
- Thread starter wampum
- Start date
Help Support Arborist Forum:
Ponchonutty
ArboristSite Lurker
Ponchonutty
ArboristSite Lurker
Pontiac was actually owned by Remington?
Ponchonutty
ArboristSite Lurker
No Pontiac owned Remington lol
Looking for info on removing the clutch on a Remington 770. The nut is off but I can't tell if it's a press fit, keyed or a spin off clutch.
Thanks
Thanks
Nut? !!
IPL don’t show a nut.
Left hand threads. Block the piston with a chunk of softwood. Improvise a spanner wrench.
By the way, I have two or three Oregon rim drive drum kits to change the Bantam types to something besides 7/16” chain.
#10619. Not worth a **** if the bronze bushing is missing.
#10619. Not worth a **** if the bronze bushing is missing.
Sorry Carl I meant to type 990
happysaws
Addicted to ArboristSite
The 990 IPL's also do not show a nut for securing the clutch...
What you talking about? Pics would help.
What you talking about? Pics would help.
Got a 990 IPL you can share?
RH thread on the shaft
RH thread on the shaft
See pics in the above post. There's a RH nut outboard and a LH thread, larger diameter inboard. I got the clutch off.
Maybe a later or earlier version or just the design used at the plant in Toronto.
Still hoping to find an IPL as it is being stripped down.
happysaws
Addicted to ArboristSite
I will see what I can do.
It would be much appreciated!
happysaws
Addicted to ArboristSite
Here's what I got for now...
Thanks for taking the time to do that. I owe you one!
happysaws
Addicted to ArboristSite
Not a problem!
That's awesome. Thanks for posting.
happysaws
Addicted to ArboristSite
Pics should now be more legible...
Thanks for making the pics better! I converted all the pic to a pdf file so they can be saved as a file.
