KG441c
Keith
Wonder if a different solenoid would help or is there an updated coil? Just wondering
PS stays sharp for me but I usually cut green hardwood and stay out of the dirt
Wonder if a different solenoid would help or is there an updated coil? Just wondering
Ive used both and cant tell a big difference eitherI have some loops of PS keith , i just use the PM because sometimes i cant avoid the mud on the wood..its not a race for me...i cut little 10-12" pecker poles with mine , nothin big.
On the coil u r referring to reindeer? Ill have to see what year my saw is tooIt has a newer carb I replaced it with last winter(120 EURO!). If you can PM yer part #, I can check it against mine when I am out there tomorrow with it clearing one of our ditches.
Lol!! Thats an aweasome noodling 42cc machine!!!!
I'm sure they do. We have a couple dealers on the forum here.I think Cannon makes one
I find the ported 241 is a bit much for picco. I don't get very long out of a picco chain at all on my 241. It runs NK very well, and the teeth last much, much longer. While not as fast with standard 325, it does rather well with that as well.
Here she is in semi seasoned ash on an 18" bar(and being dogged in with reversed spikes)before she ripped the picco chain in two:
I think Bailys makes a Woodland Pro alsoI think mine is Dec, 2012. One of the earlier ones.
The vid with the ash shows that 241 with a 6 pin sprocket. On a picco, this thing is very angry with a 6 pin rim. Not as much top end, but as you can see, 2 foot of ash is not a problem. Only problem is the chain won't last in that set up. I went through 2 picco chains in one week, btw. Fortunately, they were free, but I didn't replace them. I'm back on 325 standard. I am eventually gonna go and get a 16" NK set up as my old 17" bar died a while back, too. Does Stihl make an NK set up, or will I have to mod another husky mount bar?
I believe that's actually a re-branded Cannon.I think Bailys makes a Woodland Pro also
Don't ever let that one go!Nice thread on this saw. Dad bought me on of these for firewood last Christmas. I use a lot and enjoy it. Seems like quit a step from the 024 I had been using.
So it's a collector's saw?Don't ever let that one go!
It is to him, since his late father gave it to him as a gift.So it's a collector's saw?
Enter your email address to join: