Stihl 036

[pioneerguy600]

I'm thinking he may have taken it to a couple of defective chainsaw shops.

I was thinking the same thing, probably got him the wrong pump for this model. I have built 5-7 of the 034 and 036 saws and never had any problems finding pumps for them.

 

[albert]

Older 034's have a non adjustable pump and no adjuster hole in the crankcase

 

[Adeadly]

Older 034's have a non adjustable pump and no adjuster hole in the crankcase

Think it should be the older one as I don't see the adjuster hole.

Crank bearing is seated correctly.

Probably right about the chainsaw shops, didn't impress much.

I ll try an 034 non ajustable pump and go from there

Thanks

 

[Adeadly]

Think it should be the older one as I don't see the adjuster hole.

Crank bearing is seated correctly.

Probably right about the chainsaw shops, didn't impress much.

I ll try an 034 non ajustable pump and go from there

Thanks

034 pump fitted to the 036 perfectly

Thanks

 

[3000 FPS]

The part number I found was 1125 640 3201 Oil pump.

 

[Bro]

The part number I found was 1125 640 3201 Oil pump.

That's what I got: 1125 640 3201


BRO's iPhone

 

[Arrowhead]

Can you post a pic of the pump you need? I most likely have a good used one. I have a bunch of 034/036 parts.
I know your in Ireland... if I have one, it's yours.

 

[3000 FPS]

Can you post a pic of the pump you need? I most likely have a good used one. I have a bunch of 034/036 parts.
I know your in Ireland... if I have one, it's yours.

I think he found a 034 pump that fit it already.

 

[Arrowhead]

I think he found a 034 pump that fit it already.

Thanks... I missed that.

 

[Adeadly]

Thanks... I missed that.

Thanks all sorted now

 

[Fish]

Hi, I bought a Stihl 036 on ebay, it was cheap but didn't have an oil pump, clutch etc. I am in Ireland and have had it in a few chainsaw shops but when they order a 036 oil pump it does not fit. Is there any number on the saw that I can use to make sure it is an 036

Thanks

In what way does it not fit?

 

[ZeroJunk]

In what way does it not fit?

That is what I would like to know. If the 036 adjustable pump won't work in a crankcase without the adjustment hole, or in an 034 for that matter, it would be good info. Or, if it was some error at the Stihl dealer.

 

[Fish]

No, looking back, the older versions of oil pumps were replaced by the newer ones, I am just wanting to see a pic of the oil pump he has with
the crankcase in the pic too.

That would probably speed things up a bit. Plus post the part number of the pump he has.

 

[albert]

The early 034's had a non adjustable pump. The crankcase is different and has no adjuster hole. The adjustable pump will not fit these cases w/o grinding. Kinda like 026 cases without the adjuster hole.

 

[Fish]

The early 034's had a non adjustable pump. The crankcase is different and has no adjuster hole. The adjustable pump will not fit these cases w/o grinding. Kinda like 026 cases without the adjuster hole.

Yes, the mediacat shows a third oil pump chassis with no part number and no explanation, Stihl has done that crap before.....

 

[Fish]

Here is the blowup.....

View attachment 275302

 

[Adeadly]

Here are the pictures of the Pump

The number on the one that I got that fits has 1125 on the front and 1134 on the back

View attachment 276480View attachment 276481View attachment 276482View attachment 276483View attachment 276484

 

[ZeroJunk]

Here are the pictures of the Pump

The number on the one that I got that fits has 1125 on the front and 1134 on the back

View attachment 276480View attachment 276481View attachment 276482View attachment 276483View attachment 276484

Would the new adjustable pump work if you took a Dremel tool or something and notched the crankcase for the adjuster screw to fit in, just leave it wide open I suppose. ?

 

[Adeadly]

Would the new adjustable pump work if you took a Dremel tool or something and notched the crankcase for the adjuster screw to fit in, just leave it wide open I suppose. ?

Yeah it would but didn't want to do that.

 

[ZeroJunk]

Yeah it would but didn't want to do that.

I don't blame you, just curious.