Stihl 056 magnum 2 manual needed.

[Winterbiker]

Hey all.
I'm fixing an 056 m2.
No spark.
Can anyone link me with a parts manual for this beauty?
Thank you.

 

[hotshot]

Did you do a Google search?, the Stihl 056 IPL is posted on there...by Motoculture Jean.

There’s not a separate magnum IPL, if that’s what you meant.

 

[Winterbiker]

Did you do a Google search?, the Stihl 056 IPL is posted on there...by Motoculture Jean.

There’s not a separate magnum IPL, if that’s what you meant.

 

[Winterbiker]

Did you do a Google search?, the Stihl 056 IPL is posted on there...by Motoculture Jean.

There’s not a separate magnum IPL, if that’s what you meant.

Really?
I was under the impression that over the years the 056 changed.
I will need the coil numbers for the magnum 2.

 

[hotshot]

It’s on page 20, a SEM GA module.

If you go to the “Beg for manuals” thread, you can ask & get the service manual.

 

[Winterbiker]

It’s on page 20, a SEM GA module.

If you go to the “Beg for manuals” thread, you can ask & get the service manual.

That's awesome.
Thank you.

 

[hotshot]

What’s even more awesome is you can also ask for the 056 technical service bulletins.

They’re definitely worth a read, as it has some of the magnum 2 upgrades like 10mm bar studs, taller lever kill switch, cog drive oil pump gear, Walbro WJ-4 carb, rear buffer changes, etc.

 

[farmer steve]

What’s even more awesome is you can also ask for the 056 technical service bulletins.

They’re definitely worth a read, as it has some of the magnum 2 upgrades like 10mm bar studs, taller lever kill switch, cog drive oil pump gear, Walbro WJ-4 carb, rear buffer changes, etc.

yes the tech bulletin has a bunch of "need to know" stuff if your working on a 56 mag.

 

[Winterbiker]

yes the tech bulletin has a bunch of "need to know" stuff if your working on a 56 mag.

That's what I need.
Thank you for your help.