W wildlanstihlguy New Member Joined Jun 3, 2009 Messages 2 Reaction score 0 Location bend oregon Oct 26, 2009 #1 hey all, ive got a 440 with a stripped case, is there an oversized barstud i can drill and tap too or am i stuck with a helicoil???
hey all, ive got a 440 with a stripped case, is there an oversized barstud i can drill and tap too or am i stuck with a helicoil???
Bubbles Up ArboristSite Operative Joined Oct 10, 2009 Messages 323 Reaction score 97 Location Fraser Valley Canada EH! Oct 26, 2009 #2 others will chime in with a solution,a heliciol will work but not to good in a high vibration area, try a timesert . http://www.timesert.com/
others will chime in with a solution,a heliciol will work but not to good in a high vibration area, try a timesert . http://www.timesert.com/
Guarddog1 ArboristSite Guru Joined Oct 17, 2008 Messages 503 Reaction score 50 Location Upstate New York Oct 26, 2009 #3 I used two of these in my 026 worked great you can pick the external thread size and internal. No special tools were needed. http://www.mcmaster.com/#threaded-inserts/=482v7l
I used two of these in my 026 worked great you can pick the external thread size and internal. No special tools were needed. http://www.mcmaster.com/#threaded-inserts/=482v7l
Rookie1 Addicted to ArboristSite Joined Apr 19, 2008 Messages 6,199 Reaction score 1,822 Location Suburb of Cleveland,Ohio Oct 26, 2009 #4 Im not familiar with them but I remember this thread. Youll have to check dealer.http://www.arboristsite.com/showthread.php?t=40034&highlight=oversize+bar+stud
Im not familiar with them but I remember this thread. Youll have to check dealer.http://www.arboristsite.com/showthread.php?t=40034&highlight=oversize+bar+stud