ordered the carb solenoid today, costs 18 dollars, the dealer said he was gonna order 10 of them cause the fit all models of M-tronics, that's cool that its a universal part.
Stihl MS 661 having the bog blues
- Thread starter funky sawman
- Start date
Help Support Arborist Forum:
Mastermind
Work Saw Specialist
Just for anyone that may need this.....
M-Tronic fuel solenoid 0000 120 5110
M-Tronic fuel solenoid 0000 120 5110
The shop tech was standing there when I ordered the solenoid, he asked why I need on of those, I just told him that I wanted a spare..... I just don't trust the mechanics around here, so warranty or not, I still do my own work.
big t double
Addicted to ArboristSite
Here's some destructions if you want em...and can read em.
darn part must be backordered from stihl, stihl waiting LOL
Finally got the carb solenoid valve. It was very simple to install, like 10 minutes total. I really like the design and simplicity of this saw... tomorrow I have a load of firewood to cut and I will report back my findings.
chris zautner
ArboristSite Operative
- Joined
- Jul 19, 2014
- Messages
- 301
what website is that on?
big t double
Addicted to ArboristSite
Arboristsite.com
Hey treesmith, now when its "hunting at idle" try blipping the trigger as fast as you can a few times, this is when mine boggs. I guess if I wasn't a throttle blipper the saw would show no problems whatsoever.
Knobby57
Peeing outdoors
I've found a grabby chain can throw them off a bit . Maybe it's something with the rpm variation . Easy enough to try a fresh chain
Sent from my phone when I should be working
Sent from my phone when I should be working
ok, went out an bucked a 1/2 a cord with it, even after resetting the m-tronic, it still is bogging. I am finding that as the outside temp gets hotter the saw boggs more. this morning when it was 55 degrees it ran fairly well, then it got up to 70 degrees and it was bogging a lot.
chris zautner
ArboristSite Operative
- Joined
- Jul 19, 2014
- Messages
- 301
my 441 cm does the same exact thing
Deets066
Firewood hack
My 362 C ran great all day today .... Sorry! Hope you get it worked out what ever it is.
If I didn't need a big saw, I sure would like to have a ms362cm
I am suspect of a bad discharge nozzle in carb......... BUT I have never been successful in changing one of those out without damaging the carb housing ARGGG
Locust Cutter
Sawing for Sanity
Subbed...
chris zautner
ArboristSite Operative
- Joined
- Jul 19, 2014
- Messages
- 301
i took my saw back to the dealer and they plugged into the computer and it said there was nothing wrong so they adjusted some things and reset the mtronic and it work fine for a half tank and now its got the god damn bog blues now. ive got about ten tank in her now i'm thinking about taking her to a different dealer that really knows about mtronic and have them fix it. 
