This saw came to me with a scored piston. Cylinder was cleaned and a new piston was installed after I ported the cylinder. Base and chamber have been cut along with port timing changed, timing advanced, and muffler modded. Saw runs very strong and compression is 185 after 4 tanks of fuel thru the saw. Stihl orange bottle mix at 40:1 has been used in the saw.
**** There is a broken plastic mount on the fuel tank clutch side. A screw was installed by someone else and I didn't notice it until it started leaking fuel. This fix will need some sealer around it to stop the leak. It holds solid so I don't think the tank needs replaced. Please look at the last 2 pictures.
ASKING 575.00 OBO PLUS SHIPPING
**** There is a broken plastic mount on the fuel tank clutch side. A screw was installed by someone else and I didn't notice it until it started leaking fuel. This fix will need some sealer around it to stop the leak. It holds solid so I don't think the tank needs replaced. Please look at the last 2 pictures.
ASKING 575.00 OBO PLUS SHIPPING