Bowtie
Gearhead
Also need 4 066 cylinder head screws (M6x25). I know I can order them at work, but worth a try here.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Also need 4 066 cylinder head screws (M6x25). I know I can order them at work, but worth a try here.
Wicked500R
ArboristSite Guru
372XP parts
Ok, Still need a few things for the 372..
HD filter knob and bolt
HD filter.. I can order one but maybe someone has an extra nice one laying around..
Small outer dog
Black coil
A screw that bolts in the bottom on the wrap handlebar. (coarse thread)
I think thats about it for now.. Please PM if you can help me out, Thanks!
Clean Green at the ready !
Ok, Still need a few things for the 372..
HD filter knob and bolt
HD filter.. I can order one but maybe someone has an extra nice one laying around..
Small outer dog
Black coil
A screw that bolts in the bottom on the wrap handlebar. (coarse thread)
I think thats about it for now.. Please PM if you can help me out, Thanks!
Clean Green at the ready !
It's gonna sound lame, but I could use some Craftsman 42cc 18" "Special Edition" parts (or carcass) to fix up a buddy's saw in the spirit of the season. Main focus is on the clutch/sprocket, but it has some recoil issues too. Haven't even had the time to cross ref the Poulan equivalent, so figured I'd start here for the sheer punishment value. (Should make workin' on this thing easier after I get the chops bustin' outta the way!) Hell, he could get a damned near new one on CL for thirty bux, but it's one of those sentimental attachment things and he'd be appreciative if I was able to revive it for him as a holiday gesture.
Not much to trade in this context, but can do $$$ / shipping.
As usual, TIA.
Poge
Not much to trade in this context, but can do $$$ / shipping.
As usual, TIA.
Poge
i may be able to get those for you in partial exchange for the before mentioned parts if need be
I have some parts that would work I think?Never heard of special edition one? LOL
mp5n
ArboristSite Operative
Need a lower AV mount and 1 bar stud fro an Echo CS300
I just picked up an Echo CS300. The saw has a busted AV mount where the wrap handle connects to the main chassis next to the fuel tank and a broken bar stud. It runs well otherwise. If anyone can help out please PM.
Thanks in advance,
MP5N
I just picked up an Echo CS300. The saw has a busted AV mount where the wrap handle connects to the main chassis next to the fuel tank and a broken bar stud. It runs well otherwise. If anyone can help out please PM.
Thanks in advance,
MP5N
MechanicMatt
Cut Split Stack Burn
Uncles Buddy snagged a 044 of the bay, need a top cover and air filter cover. PM me, Im all out of trading goodies but Ill see what those two old fellas got, probably the green printed kind.
Tree Wacker
ArboristSite Operative
i might have some parts that will work.i got the everything exsept the piston and cylinder
o8f150
Tree Freak
i need some parts for a echo 500vl,, this is the one i did for a guy today,, he would like to have this extra parts on hand,, he is willing to pay for them with no problem,,,,,,, i need the clutch drum/sprocket,, its 3/8,,, also need either nos or good used points and condensor,,also a starter assembly,, if anyone has these parts or even a blownup parts saw that has them let me know,,,only thing i have right now is that nasty uslees green toilet paper,,,,,,thanks guys
Anyone got a 029, 039, MS290, MS310, or MS390 project saw they'd want to get rid of? The condition of the engine does not matter. PM me if you have something.
I may have some of that in the shed. I'll look tomorrow.
Just for fun, I'm still looking for a manual oiler or at least the check valve springs for one for a Echo CS-900EVL.
Also looking for the complete hand guard or chain brake setup for the same.
Might have some junk here that someone needs....
Also looking for the complete hand guard or chain brake setup for the same.
Might have some junk here that someone needs....
o8f150
Tree Freak
Metals406
Granfodder Runningsaw
I'll look tomorrow and see if I got one.
wigglesworth
Booned
Another one needin a home. It's going on eBay this week. It fires up and runs, idles and revs nice. Kill switch don't work. Great comp.
Looking for a 660 crankcase and tank, or $$ or ??
Looking for a 660 crankcase and tank, or $$ or ??
timberdollars
ArboristSite Operative
Mcculloch 10-10, yard sale find
Stopped by a yard sale today (tweeker house) had this Mcculloch 10-10 and another apart 10-10A in a box. Bought both and a echo weedeater for $15.00.
This 10-10 runs perfect, drained gas out put new in started it, ran it!!! plug stopped firing so stuffed a used one in and running great. auto oiler may not work? I'll adjust and check it out. 60001 model, oem hard nose bar, new chain. Haven't really touched this saw, or cleaned it.
Other parts saw 10-10 Auto looks to be complete minus a few bolts? air filter is rough, good P/C, 60002u model.
Also came with the pictured FULL WRAP STIHL HANDLE BAR, most likely 044/046 ??
Open for trades!!! Partners, $$$$, parts, pieces, saws, pioneer P42 stuff, poulan 4200 complete crankcase
This 10-10 is early model and in good shape, its getting cleaned also. HEAVY ITEMS TO SHIP!
SORRY LOOKS LIKE THE FULL WRAPS GOING TO WEST KENTUCKY, only on here 5 min.
Duane
Stopped by a yard sale today (tweeker house) had this Mcculloch 10-10 and another apart 10-10A in a box. Bought both and a echo weedeater for $15.00.
This 10-10 runs perfect, drained gas out put new in started it, ran it!!! plug stopped firing so stuffed a used one in and running great. auto oiler may not work? I'll adjust and check it out. 60001 model, oem hard nose bar, new chain. Haven't really touched this saw, or cleaned it.
Other parts saw 10-10 Auto looks to be complete minus a few bolts? air filter is rough, good P/C, 60002u model.
Also came with the pictured FULL WRAP STIHL HANDLE BAR, most likely 044/046 ??
Open for trades!!! Partners, $$$$, parts, pieces, saws, pioneer P42 stuff, poulan 4200 complete crankcase
This 10-10 is early model and in good shape, its getting cleaned also. HEAVY ITEMS TO SHIP!
SORRY LOOKS LIKE THE FULL WRAPS GOING TO WEST KENTUCKY, only on here 5 min.
Duane
Last edited:
Another one needin a home. It's going on eBay this week. It fires up and runs, idles and revs nice. Kill switch don't work. Great comp.
Looking for a 660 crankcase and tank, or $$ or ??
PM sent
gloud
ArboristSite Operative
One last try before I buy one off ebay- I need a late 272 clutch cover and brake assy. I have a 044 12mm jug and slug to trade or I also have $
