Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Potpourri of New Old Stock Homelite parts.

Hay holiday shoppers here’s a box of stocking stuffers to delight the whole family. This is a deal for some Homeliter (is that a word ?) trade me something I can use for this assortment.

What’s in the box:

102, 103 etc. front handle .
102, 103 etc. carb cover
350, 360 front handle.
C7 starter housing
C7 carb cover (some oxidation little paint bubbling from 40 year of storage)
XL12 connecting rod
2 Super XL rings
2 Super EZ, 150 etc rings.
Gas cap # 64140
Gas cap # 64375
925 oil pump complete
150 oil pump diaphragm and front housing.
Coil # 63626
Reed assembly # 55932
Module # 12669-A for 360, 450, 550, 650, 750 (note this was in the original box but has been mounted and run, I have not tested it so may be good or bad) ?


hh.jpg
 
Last edited:
Husky parts needed

Looking for a bar cover for a Husky 55, and need all of the parts, from trigger to carb, on a Husky 61 Practica Rancher. Could also use a good bar cover and white top.......Have a few other Husky parts to trade (350)......
 
Piston for a 357xp, got my hands on a straight gassed one. I want to try and fix it by Christmas to gift it to a friend in need. Thanks. PM me, and we can try to work something out.
 
Piston for a 357xp, got my hands on a straight gassed one. I want to try and fix it by Christmas to gift it to a friend in need. Thanks. PM me, and we can try to work something out.

I am in the same boat as you with a scored 357. I talked to a guy here who has done several of these recently, and he has used the VEC pistons from Northwoods with no issue. Supposedly, the Meteors are good too. I'll probably get a Meteor. I'm a little afraid to pull the jug, as I'm going to be mad if it is grooved.
 
I am in the same boat as you with a scored 357. I talked to a guy here who has done several of these recently, and he has used the VEC pistons from Northwoods with no issue. Supposedly, the Meteors are good too. I'll probably get a Meteor. I'm a little afraid to pull the jug, as I'm going to be mad if it is grooved.

Its gonna get the acid bath tonight. I hope it cleans up, if not ebay has a few used ones. But ebay wants some big dollars.
 
Trade me something for the whole box of stuff been getting pm's for small parts of it, this is an all inclusive deal. Bars/chains , and small old saw a project saw, whatever.

Potpourri of New Old Stock Homelite parts.

Hay holiday shoppers here’s a box of stocking stuffers to delight the whole family. This is a deal for some Homeliter (is that a word ?) trade me something I can use for this assortment.

What’s in the box:

102, 103 etc. front handle .
102, 103 etc. carb cover
350, 360 front handle.
C7 starter housing
C7 carb cover (some oxidation little paint bubbling from 40 year of storage)
XL12 connecting rod
2 Super XL rings
2 Super EZ, 150 etc rings.
Gas cap # 64140
Gas cap # 64375
925 oil pump complete
150 oil pump diaphragm and front housing.
Coil # 63626
Reed assembly # 55932
Module # 12669-A for 360, 450, 550, 650, 750 (note this was in the original box but has been mounted and run, I have not tested it so may be good or bad) ?


hh.jpg
 
Looking for a bar cover for a Husky 55, and need all of the parts, from trigger to carb, on a Husky 61 Practica Rancher. Could also use a good bar cover and white top.......Have a few other Husky parts to trade (350)......

I should have the 61 Practia stuff. Can you be more specific on what your needing?
I know I don't have a white top or clutch cover though.
 
Lookin for air filter for a 076 cut off saw! thanks in advance

Anyone looking to deal with this guy, he screwed me over. Have him pay in advance or don't ship to him. He is ignoring me, and its getting old. hate to do this, but he deserves to be revealed. A thief. Read his public messages if ya dont believe.
 
I should have the 61 Practia stuff. Can you be more specific on what your needing?
I know I don't have a white top or clutch cover though.

This is what I have (or don't have)........

attachment.php


attachment.php


attachment.php


The bar cover is usable, but badly broken....

attachment.php
 
Anyone looking to deal with this guy, he screwed me over. Have him pay in advance or don't ship to him. He is ignoring me, and its getting old. hate to do this, but he deserves to be revealed. A thief. Read his public messages if ya dont believe.

Well, for starters, this is a SWAPmeet. If you sold him something (I know it happens all of the time) from here, you kinda went against the purpose of the thread. It is supposed to be for trading, so as to eliminate posts like this. Anyhoo, nothing against you or Jacob. I have dealt with him in the past with no issues. It is Christmas, and $ is tight for everyone. Can you please tell me how much he owes you, and wether you want the cover back or the cash. I'll be glad to pony up the whopping $20, used cover or whatever it is (surely you did not charge him more than $20 for a used cover???) to put this to bed.
 
Having managed commercial construction projects for years I've found a very simple principle that works for me: "Do what you say you are going to do" If I hire a contractor and he sticks his neck out with his labor and materials I pay him when I say I will or I don't commit. I expect the same in return, no one likes to get the run around ? If something comes up and you can't meet an obligation then at least be courteous enough to let the other party know and save face, how long does it take to write an email or pm ?

I should also mention someone could be sick or have injuries or have a family emergency and that has to be allowed for.

Having said that all my experiences doing deals with people on this forum have been beyond great, there's a mutual trust there that makes it fun.

Tim

Well, for starters, this is a SWAPmeet. If you sold him something (I know it happens all of the time) from here, you kinda went against the purpose of the thread. It is supposed to be for trading, so as to eliminate posts like this. Anyhoo, nothing against you or Jacob. I have dealt with him in the past with no issues. It is Christmas, and $ is tight for everyone. Can you please tell me how much he owes you, and wether you want the cover back or the cash. I'll be glad to pony up the whopping $20, used cover or whatever it is (surely you did not charge him more than $20 for a used cover???) to put this to bed.
 
Last edited:
Back
Top