Mastermind
Work Saw Specialist
I need a few 372xp parts or a parts saw from that family. I've got stuff for trading and the never popular worthless gubermint notes.
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Naked Arborist
Hack from way back.
wanted
I need an oil pump drive gear for a 026. The one that goes inside the plastic non adjustable pump housing. They are usually cracked on the plastic cases. Mine had a jammed drive gear that has flat sided the teeth
My housing is good. Have parts and paper to trade. Hope to get my parts list posted between Christmas and new years.
I need an oil pump drive gear for a 026. The one that goes inside the plastic non adjustable pump housing. They are usually cracked on the plastic cases. Mine had a jammed drive gear that has flat sided the teeth
My housing is good. Have parts and paper to trade. Hope to get my parts list posted between Christmas and new years.
Wagnerwerks
The underdog..
I need an oil pump drive gear for a 026. The one that goes inside the plastic non adjustable pump housing. They are usually cracked on the plastic cases. Mine had a jammed drive gear that has flat sided the teeth
Your inbox is full.
Is the 024 the same as the 026? I may have an 024 pump laying around.
Naked Arborist
Hack from way back.
Inbox Fixed. I think they are the same. I will have to check the part #'s tonight. Heading out the door now.
:msp_smile:Talk about service here lol 4 minute response time :msp_smile:
Saw Dr.
Junk Collector
Whatcha need?
Mastermind
Work Saw Specialist
Terry sent me a PM a few minutes ago so I was thinking up a list.........I'll work on that and post it here......
Thanks guys.
I have a few 372 things too, not a complete project saw but a few parts kicking about.
Mastermind
Work Saw Specialist
I bought a open port 365 with a busted case......I've got a top end and a case, covers etc. Think I just need an intake boot and clamp and a muffler.
Intake boot and clamp I have for sure, muffler I'd have to check on. I think all my mufflers are gone. I can get the intake boot and clamp on the way in the a.m., I have shtuff to mail to other members anyway.
fastLeo151
Addicted to ArboristSite
Randy
I have a muff, its dented in the front he that matters....
I have a muff, its dented in the front he that matters....
Mastermind
Work Saw Specialist
I could run with that.........:msp_tongue:
I'm gonna let it go.
The dent wouldn't bother me at all......does it have the brace?
I could run with that.........:msp_tongue:
I'm gonna let it go.
The dent wouldn't bother me at all......does it have the brace?
I'll include a new brace.
Mastermind
Work Saw Specialist
I owe ya one JJ.
MechanicMatt
Cut Split Stack Burn
Im rebuilding a 357xp for a friend, he took the saw half apart to see how scored it was. LOST a bunch of bits and pieces.
Need throttle linkage, whats the deal with the plastic clamp on the intake? Is there something to fix that? Muffler screws for the bracket, oh yeah and a piston and ring
got a few bits and pieces to trade.
Need throttle linkage, whats the deal with the plastic clamp on the intake? Is there something to fix that? Muffler screws for the bracket, oh yeah and a piston and ring
got a few bits and pieces to trade.
fastLeo151
Addicted to ArboristSite
Randy
its got a brace, pm me your address
its got a brace, pm me your address
A new brace, intake boot, clamp, and intake collar are headed Randy's way too.
Pp335
Just picked up a PP335 and it's missing the hand gaurd,does anyone have one they'll part with? I've got a new rim and sprocket for the same type of saws that I'll trade.
:msp_thumbup:
Just picked up a PP335 and it's missing the hand gaurd,does anyone have one they'll part with? I've got a new rim and sprocket for the same type of saws that I'll trade.
:msp_thumbup:
Mastermind
Work Saw Specialist
You fellers need anything.......just ask. I've got some stuff ya know.
