Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Looking for a really nice recoil side case half for a 346XP , got pay pal & trade stock !
Who needs some parts rigs?
Echo 500vl, Mac 2-10, husky 41
Mac 610 parts
Couple old blue craftsman powersharp a in there
Jred 2036, no compression
Dolmar bottomed, unknown model number
Echo 500vl, Mac 2-10, husky 41
Mac 610 parts
Couple old blue craftsman powersharp a in there
Jred 2036, no compression
Dolmar bottomed, unknown model number
Detroit Dazzler
ArboristSite Operative
It's a SL-4, runs. Missing air filter, cover, and bar cover. I saved it from the dump
Detroit Dazzler
ArboristSite Operative
What's the deal with the 41?
That saw is already sold. I still have the jred 2036. Same basic saw I believe.
pm sent
Bump
Big_Wood
westcoast dweller
helping my brother rebuild his first saw. saw is an 028 woodboss. stripped it down to the cases with him today and got a list together of what were gonna need. he's not rich and neither am i so were trying to do it on the cheap. anything AM is perfectly fine. all we need is for it to run for him in the end. here's the list. any help is greatly appreciated to train a newb with saws.
complete Top end (or just a usable cylinder)
chainbrake handle
2 front AV mounts
good air filter
complete Top end (or just a usable cylinder)
chainbrake handle
2 front AV mounts
good air filter
Duke Thieroff
Fill your hands, you SOB!
I've got the brake handle and the AV mounts.
If you can find a jug I've got both pistons, the regular and super in Meteor
If you can find a jug I've got both pistons, the regular and super in Meteor
Big_Wood
westcoast dweller
was browsing saw salvage and was trying to talk him into just getting that crank case you got. as long as it has good bearings of course. PM sent
chevy85
ArboristSite Lurker
im in need of a flywheel for a MS250 stihl any help would be greatly appreciated
Need a couple recoil covers or assemblies for Echo CS341 types.
Have a bucket of Stihl MS290 parts for trade.
Have a bucket of Stihl MS290 parts for trade.
I still have a bunch of Echo Th stuff.U never got back to me on the CS 360/350(?) saw.
RR
The 330T and 360T is a piston ported engine. Not sure they (recoils) are the same on the reed valve engines. CS341/CS3000 ??
PM sent
chevy85
ArboristSite Lurker
still in need thought someone on here might have one. if not then off to ebay i guess.
I''ll try to remember to look here when I get out to my storage after lunch sometime. I know I have some 025-250 parts, might be a flywheel out there.
Stihl 064 coil
My coil gone bad is a PRUFREX CDIC 10G/1.
Any body have a good 1 I could trade for ? Or possibly the flywheel good for the universal 0000 400 1300 coil.
I have a 1122 1314 coil and coils off 034's, 026's etc..Not sure what all combinations will work for me and may be I should pull my flywheel and check its # . Came to me with the CDIC coil, not sure if that flywheel works with any other coil ?
The lands going up for sale I live on, shortly, so I am trying to come up with some $ to buy the house and buildings. Don't want to spend a lot on this saw now, as I was thinking of putting it up for sale to raise some $.
I have some Stihl parts,and a bit of Husky, McCulloch this and that in parts for trade. Have extra new chain loops and some bulk I could use for trade some new 16" .325 stihl bars and several other bars I could trade, mostly 20" and under.
My coil gone bad is a PRUFREX CDIC 10G/1.
Any body have a good 1 I could trade for ? Or possibly the flywheel good for the universal 0000 400 1300 coil.
I have a 1122 1314 coil and coils off 034's, 026's etc..Not sure what all combinations will work for me and may be I should pull my flywheel and check its # . Came to me with the CDIC coil, not sure if that flywheel works with any other coil ?
The lands going up for sale I live on, shortly, so I am trying to come up with some $ to buy the house and buildings. Don't want to spend a lot on this saw now, as I was thinking of putting it up for sale to raise some $.
I have some Stihl parts,and a bit of Husky, McCulloch this and that in parts for trade. Have extra new chain loops and some bulk I could use for trade some new 16" .325 stihl bars and several other bars I could trade, mostly 20" and under.
