2treeornot2tree
Dont cry, just do it
Using a log chart I estimated the logs weight at 15,000 lbs. My knuckleboom picks up 10,300 lbs at 6' out. It wouldn't even pickup on end.
whadja do today?
- Thread starter treevet
- Start date
Help Support Arborist Forum:
Had a little oh **** today, picking a maybe 16 inch elm, tree was cut almost through the tree tipped just a tad so I get back over it tension up on her an let off the controls and holy **** why is she free spooling? Like omg everybody run, kidding not that bad. But when you don't expect the brake on the winch to fail it sure does catch u off guard
2treeornot2tree
Dont cry, just do it
Yeah it was.
mike515
ArboristSite Operative
So glad that I don't have to deal with big logs like that anymore. I've handled my fair share of them.
Years ago, I was hired to removed a huge cottonwood. It was one of the biggest in my area. I took the 52 ft. boom straight up and down next to the tree and had to get out and climb the rest of the way up. Anyway, we got it down and chipped, hauled 13 dump truck loads of logs...not including the trunk itself. I used a 3120XP with a 6 ft. bar to cut the trunk from both sides. I barely made it across the main crotch. We had a brand new JCB telescopic loader that was supposed to lift 8000 lbs. I don't know how heavy those trunk sections were but I cut them to about 4-5 feet and that loader wouldn't lift them more than about a foot off the ground before the back wheels lifted off the ground. The customer had a place to take the trunk that was a few blocks away....just outside of that little town so I decided to chain each section to the forks and slowly move them one by one with one of the guys walking next to me because the logs were so big that I couldn't see where I was going. No way could I get them in the dump truck without cutting them much smaller and I already had enough of running that 3120xp for that day!
Anytime you're using a 6 ft bar....it's probably going to be a tough day! Anyway....yeah....cool story, bro...I know.
Years ago, I was hired to removed a huge cottonwood. It was one of the biggest in my area. I took the 52 ft. boom straight up and down next to the tree and had to get out and climb the rest of the way up. Anyway, we got it down and chipped, hauled 13 dump truck loads of logs...not including the trunk itself. I used a 3120XP with a 6 ft. bar to cut the trunk from both sides. I barely made it across the main crotch. We had a brand new JCB telescopic loader that was supposed to lift 8000 lbs. I don't know how heavy those trunk sections were but I cut them to about 4-5 feet and that loader wouldn't lift them more than about a foot off the ground before the back wheels lifted off the ground. The customer had a place to take the trunk that was a few blocks away....just outside of that little town so I decided to chain each section to the forks and slowly move them one by one with one of the guys walking next to me because the logs were so big that I couldn't see where I was going. No way could I get them in the dump truck without cutting them much smaller and I already had enough of running that 3120xp for that day!
Anytime you're using a 6 ft bar....it's probably going to be a tough day! Anyway....yeah....cool story, bro...I know.
mattfr12
The Bulldog
We just use a chain if it's to big, but most of the time it will squeeze tight enough that it won't slip off.
Jared if you try and pick something up and thr overload kicks on you will still be able to put it back down.
DR. P. Proteus
Addicted to ArboristSite
- Joined
- Dec 2, 2013
- Messages
- 2,358
Sounds real special.
Its pretty bad in there.
2treeornot2tree
Dont cry, just do it
I have had mine shut down and the only movement u could do was open the grapple. I need to call him about the paint on the chip box anyway so I will ask him about that.
Yeah, that sucks. White really shows off and rust too. I'd be calling sooner rather than later. You just bought that thing!!
KenJax Tree
Terraphobic
Farwell, MI.....they're all here in Michigan, Bandit is in Remus, Morbark is in Winn, and Terex in Farwell.
joshuatree
ArboristSite Lurker
Took my new rig out for it's first run. GMC 4500 and a Bandit 250xp. Made it halfway down the drive to the building and since the owners had decided not to salt or plow there was about a 3 inch sheet of ice and a 10 degree grade to the right I slid off and had to be winched out. Guess I'll try again tomorrow. Bahahahaha
2Tree I'd call him pretty quick on that. Maybe get it before things get really busy. I believe Matt's had the same problem with the top rusting. I know that the grapple boom is the big money piece but for the amount of money that truck cost, the damn bed should stay looking good.
Hey Matt , any luck finding the engine manual for that 250xp ?
Hey Matt , any luck finding the engine manual for that 250xp ?
mattfr12
The Bulldog
Yes I got it I been selling crap on ebay ill throw it in a flatrate box and send it to you as soon as I drop my next ebay sales off.
treecutterjr
ArboristSite Operative
Emergency tree removal! Water line busted beneath thIs Apple tree. Had to remove it and the stump for repair.
The ice is from the water shooting up and then freezing on the tree.
The ice is from the water shooting up and then freezing on the tree.
gorman
Addicted to ArboristSite
Finished up the TRAQ class today with a nice exam. Got lost going out to the field exercise but finished strong. I'd recommend it to anyone in the industry.
climbhightree
ArboristSite Operative
Plan on doing that next time it is in my area.
climbhightree
ArboristSite Operative
Some fun from Monday. It took 8 hours for us to get the Black oak completely down....which was nice cause I bid 12. Video starts slow with srt ascend. Then zipping large limbs and wood. I almost take out the mini though.
gorman
Addicted to ArboristSite
It puts some things into perspective. The class was at Swan Point Cemetery in providence. The grounds were stunningly beautiful even in the winter. Almost every tree and shrub was meticulously maintained. As well as the official resting place of H.P. Lovecraft.
climbhightree
ArboristSite Operative
Do you feel it will really help you determine hazard level of the tree? I work with 2 boros here, and they have me look over their trees every year. I'm looking for a more scientific evaluation, instead of experience and college learning.
gorman
Addicted to ArboristSite
Yes. Absolutely. It is basically assessing the tree on three different points. Likelihood for part or tree to fail, likelihood to impact, and consequences. Assess independently of each other and then put in this matrix (no keaneu reeves) for an overall rating.
Not exactly as I said but that's the jest of it. But the best part is the form you fill out, very official, and it is a really good way to validate a sound conclusion to the client. The vast majority of the time a tree's risk rating is low or moderate so you can steer the client towards preservation and phc work.
