Darkness77
ArboristSite Operative
I bought a new Stihl chain for the 660 yesterday. 84 links of 3/8 semi-chisel and it cost me $55.44. :censored:
Look after this chain for sure.
Look after this chain for sure.
Whats a chain cost?
- Thread starter Darkness77
- Start date
Help Support Arborist Forum:
Lakeside53
Stihl Wrenching
In the States... $1 an inch ($25 in your case) is a decent pro price for one chain over the counter. MSRP is about $35. If you buy 100 foot reel.. $250-275 (1640 drivers), so your chain would cost you $13-14...
Other brands are cheaper..
Other brands are cheaper..
Last edited:
Scooterbum
Addicted to ArboristSite
Full Chisel
Last time I bought one for the 066 it was $27-$28.You might want to look at baileys.woodsman pro for 12.95 a loop.That's who I'll be using from now on.
Last time I bought one for the 066 it was $27-$28.You might want to look at baileys.woodsman pro for 12.95 a loop.That's who I'll be using from now on.
Gumnuts
ArboristSite Guru
' WHAT'S A CHAIN COST '
Don't know if you like Oregon .Stihl and Oregon much of a muchness.Although the boys are giving Windsor a good rap.Labonville specials....Suggest click on their store,link, at the top of page.
PM sent
Don't know if you like Oregon .Stihl and Oregon much of a muchness.Although the boys are giving Windsor a good rap.Labonville specials....Suggest click on their store,link, at the top of page.
PM sent
Last edited:
superfire
Addicted to ArboristSite
chain price
sounds like you need a better dealer. i just bought a semi skip 63 X 375 119 driver stihl chain for a 36" bar from my local stihl dealer and it cost 45.00 saw chips. sound like you should talk to another stihl dealer for a chain quote
sounds like you need a better dealer. i just bought a semi skip 63 X 375 119 driver stihl chain for a 36" bar from my local stihl dealer and it cost 45.00 saw chips. sound like you should talk to another stihl dealer for a chain quote
Only $5 for Stihl chains. I buy my chains from a Stihl rental shop that replaces the chains everytime they go out. Some chains are almost LN, some are rocked out. I get 25" 3/8 RSC and 16 .325, both the same price. I don't run a 25" bar, so I break them and make whatever sizes I need, 36", 28", 20" 16". Can't beat a deal like that. I buy every 3/8 chain when ever I go by them.
Yea I'm still ticked over our local Stihl dealer wanting $11.95 for an 025 caged needle bearing for the sprocket. Which I refused to buy.
1.00 over the bar inches locally for Stihl chain.......
20" = 21.00
.
20" = 21.00
.
alderman
Addicted to ArboristSite
Look on e-bay
I just purchased 3 84 link Oregon chains for $30.00 shipped to my door.
They are skip tooth but for the price I'll gladly run them.
The last Husky chain I bought from a store cost me $27.50 for 105 links.
I just purchased 3 84 link Oregon chains for $30.00 shipped to my door.
They are skip tooth but for the price I'll gladly run them.
The last Husky chain I bought from a store cost me $27.50 for 105 links.
Last edited:
Woodie
"Cap'n Bullcrap'n"
Just bought 93 DL of 3/8ths skip Carlton (.058) Saturday...$33.
.
.
Trigger-Time
Addicted to ArboristSite
For Stihl chain some dealers it's $1 per inch of bar.
Dealer I use, .25 cents per driver all chain's up to .404 pitch.
Best I could get him to do on a roll of Stihl 3/8 RM .063 was $310.
But he did sell me Stihl 3/8 RM .063 135 drivers for $32 per chain.
Gary
Dealer I use, .25 cents per driver all chain's up to .404 pitch.
Best I could get him to do on a roll of Stihl 3/8 RM .063 was $310.
But he did sell me Stihl 3/8 RM .063 135 drivers for $32 per chain.
Gary
Last edited:
blackoak
Addicted to ArboristSite
Have you ever got a blood stained one yet???
I hate that when that happens, but you are right about buying chains from rental houses. You get get good deal and save some cash.I haven't purchased any new chain for awhile, but 55.44$ seems outrageous to me.
Last edited:
Darkness77
ArboristSite Operative
As I thought us Aussies get the sharp end of the stick again.
Oh well looks like I might have to look into buying a breaker and a roll of the good stuff and DIY.
Oh well looks like I might have to look into buying a breaker and a roll of the good stuff and DIY.
Lakeside53
Stihl Wrenching
First you convert it to $US.. then factor in the Aussi taxes... then the premium for being at the other end of the earth, and the tiny population premium..
Darkness77
ArboristSite Operative
Lake thats all reasonable enough but you guys can buy a GB bar for around half the price we can. That I can't understand. 
blackoak
Addicted to ArboristSite
And it still sound outrageous,
and a price I would hate to pay.dgfitz
ArboristSite Lurker
Bash Them!!!
Typical for a Steal you blind Stihl dealer. Click on the Bailey's link and
get what you need at the good old American economic freedom way.
Typical for a Steal you blind Stihl dealer. Click on the Bailey's link and
get what you need at the good old American economic freedom way.
Lakeside53
Stihl Wrenching
bunch of BS... Apart from the fact it's quoted in DOLLARS, (actually, Austrailan dollars...) comparing USA prices to anywhere else in the world is worthless... yep.., click away, then pay airfreight to Australia!
Last edited:
I bought a 2 fer 1 deal two months ago. Don't recall the shipping to be out of line and at around $10 for 2 loops... (18")
Cut a couple cord locust with the woodland pro and just put the first sharp on it 2 days ago...okay, it was overdue a bit.
Harry K
