husqvarna

Hello all! I'm hoping someone with good experience with MKI and MKII T540 XP Autotune Husqvarna's could possibly give me some advice. I'm working with two T540 XP saws one is a MkI other is a MkII. The Mk I would run fairly normally without load and for the first 5 minutes it would run in the...

Hi all, I’ve recently come into possession of a 2101 xp in great shape, starts first pull, however it leaks out of what I believe is the tank vent above the fill cap. If anyone has any advice or input on the cause or remedy of this issue Id be grateful. Thanks

Hi all, i’ve bought a few chainsaws off of arbor site now, but i am yet to sell anything through this forum! Figured it was time to share and pass on a few items! I’m mainly looking to trade for some nice saws, or NOS saws that i haven’t been able to find. I’d really like to find a jonsered...

Well i decided to buy my first husqvarna saw and it a 2100. I have absolutely no knowledge of husqvarna saws. It runs and oils but i dont have a husqvarna bar for it right now. Just wanting advice or thing to look out for.

Husqvarna 353, I need a good , well great condition saw with 16 in. bar, and chain if available. I dont want a p.o.s. " positively out of sight, just funnin. I also need Johnny 2153 ,x16 bar with 325, 50 ga.chain, the saw chain is not a have to have. What happened let a family friend...

I'm a bit torn as to sell or not to sell my 394xp. It's in good condition, all oem parts and runs good. I have someone willing to buy it at 900$ CAD. It has the full wrap Here are some pics: I put it up for sale because I am in need of the money and I don't use it that much (maybe a...

I have been having trouble with my Husqvarna 435 conking out after 10 minutes and I have struggled to get the right fuel mixture. I have set L and H to 1.5 turns counter-clockwise (the manual does not say which way feeds more or less fuel, but I saw this setting suggested in a video). The saw...

I hate to see her go and im only selling due to medical expenses and the current job loss. I never imagined I'd see this day and always have made something happen so this day never came . But now that I'm crippled and can't make things happen . I Sadly have tr oregon and in hoping to get...

Thanks for letting me join! Homeowner here, Echo CS-400 and CS-4910, and old Husqvarna 191! Lots of great info and advice here- looking to learn a lot about chainsaw maintenance and repair!

Hey guys, I inherited this 372 X-torq with a broken piston. A chunk of the skirt on the exhaust side was broken off and there were metal shaving in the exhaust. The cylinder was badly scored. I went ahead and replaced the piston and cylinder with OEM parts. I broke in the new top end properly...

Hello and thanks in advance for any help given. Thinking of moving some saws to make room for new. I have a nice stihl 038 magnum 72cc Brazil made early 1990s vintage with a new stihl 25" es bar and chain. If I decide to sell what would a good asking price be? Also have a nice husqvarna 268xp...

Hello fellas I’m going to give sales here on AS a whirl. I am new to selling here on the forum, although I’ve been on eBay for quite some time. I plan on listing saws that I personally refurb. I’m lucky (or unlucky lol) enough to be able to this full-time working out of my shop building next to...

I just bought a nice pro mac 55 and was wondering something The saw currently has a Walbro SDC single jet carb (not sure if I am using the term correctly). It has an idle screw and a low jet screw. Seems to run nicely. I have another SDC carb with double jets (idle L and H). Should I swap the...

I am so thankful for this forum and so much wisdom and encouragement shared here. I have a well used 272xp, actually 268 that was converted and my dad bought it for me well used after the conversion. It was my first saw after using father in laws poulon wild thing for a few years. The 272 has...

My own firefood saw with bigger carb. cheapest chineese cylinder ive found on 3...2..1., ignition timing advance, muffler mod, raised exhaust port, stihl chi...

I am wanting to convert my 372 high top (HD filter) to low top. I bought the following parts to do the swap: COVER 503 62 80-01 HOLDER 503 62 75-01 AIR FILTER 5114550-01 Question is, after ompleting the swap, will I need to adjust the carb ? If so what might need changing, low jet, high jet...

First saw of my own, I’m hooked and ready to get more! I’ve cut a little with it but can’t wait to really put her to work! Love these 1127 series saws! These babies are tanks!

Hi all, I'm from Belgium and I acquired my first 2100CD (already had and sold 2 2101xp's) but apparently I'm in the need for a complete clutch. The drum is okay but the other part is not there anymore. In belgium I'm not able to find any parts anymore so I was wondering if people here can help...

Hi everyone, I have the Husqvarna 236 x-torq which was given to me by my neighbour as a non-runner he couldn’t fix. Bogged when revved. I fixed that by an ultrasonic clean of the carb and a carb kit. It has a Zama carb on it. I used a tachometer and followed the Husqvarna carb settings guide I...