Want to Sell Husqvarna, Jonsered, Sachs Dolmar, Stihl many NOS, NLA, and USED parts

[T_Fishaa]

Hi all, i’ve bought a few chainsaws off of arbor site now, but i am yet to sell anything through this forum! Figured it was time to share and pass on a few items! I’m mainly looking to trade for some nice saws, or NOS saws that i haven’t been able to find. I’d really like to find a jonsered cs2153, jonsered cs2063, jonsered cs2139t, husqvarna 346xp oe special edition clear plastics(any of the clear plastic models) Stihl 088magnum, and sachs dolmar 153,166. All listed below are nos. husqvarna 2101xp oem cylinder and piston kit, 2100 NOS OEM Cylinder, NOS SEM coil for 2100 and more, Husqvarna OEM 2100 air filters,Jonsered 2094/2095 top cover with air filter cover and air filter, pioneer s6000 full wrap handle, Jonsered 2083 West Coast full wrap handle, Jonsered 2077,2083 OEM Piston kit, John Deere 550cs/Homelite 8800 OEM muffler kit, Stihl 050, 051 AV crankcases (1111-020-2100) Stihl 028av crankcase, stihl 038 av Crankcase, stihl 056av Crankcase, 044 crankcase. Stihl clutch covers many models, Dolmar 144 starter cover and a room full of other NOS PARTS as well. Not looking to sell as a lot, but more willing to wheel and deal with a New or NOS Saw.Open to fair offers Located in central, Pa. PP GOODS AND SERVICE. shipping to lower 48 Will update photos this evening

 

[snobdds]

Will take your Husky 2100 OEM cylinder and piston.

Price?

 

[snobdds]

Oh and a 2100 air filter.

 

[T_Fishaa]

Will take your Husky 2100 OEM cylinder and piston.

Price?

Probably my most prized possession on the list! However the 2100 is just the cylinder, the 2101 is the piston and cylinder kit( Rings, wrist pin, bearing, and circlips). I’d have to get at least $375 and $75 for the air filter selling out right plus shipping. i’ll take pictures of them

 

[snobdds]

I always find the most prized possession.

I would like to see pictures of it though.

 

[snobdds]

What is the price on the 2101 entire kit? To my knowledge, there should be no difference between the 2100 and 2101 cylinder and piston.

 

[T_Fishaa]

Yes Both the same KS 833/2a

 

[T_Fishaa]

couple more comparing

 

[snobdds]

That is sexy AF...but I guess I will have to go with the dukes 2100 aftermarket cylinder and piston.

Some nice parts you have there...good luck with the sale.

 

[T_Fishaa]

Much appreciated! These are the only two i have ever seen NOS even on the bay! i’m sure they are out there and i seen a couple used ones on there. I know it’s priced on the higher end, but the cash is gonna be going towards either a new saw, or i’d prefer to just trade for Something mint and give a better deal that way! Thanks for reaching out if you need anything besides the more rare parts feel free to message me.

 

[ballisticdoughnut]

Got any 2100 fuel hose grommets?

 

[T_Fishaa]

More pictures of just stihl

 

[av8or3]

What kind of Dolmar stuff you hoarding?

 

[T_Fishaa]

Have Gathered all my NOS sachs dolmar and used parts in a long plastic storage container. Have some cases, rear handles and top handles as well as wrap handles for the 123,133 and 153. have a NOS 111 never fueled was used as a parts donor missing very few items. Have a used 309 parts sawneeds carb and cutter arm. couple nos bars unsure of guage

 

[tspeedle]

I‘ll take the 044 crankcase and everything else you got from the 1128 series saws, if I can.
What is that tank handle you got there, 038?

Also, do you have any Stihl wrap handles?

 

[T_Fishaa]

028 tank handle on a nos 028av crankcase

 

[av8or3]

Pm sent Dolmar

 

[T_Fishaa]

Nos sachs dolmar 111. had some parts robbed never fueled

 

[T_Fishaa]

is to many chainsaw parts ever to many? pictures as i sort through things

 

[ballisticdoughnut]

Got a jonsered 630 super piston? 48mm full skirt single ring. Can get a part number if that helps.