mikerudder
Chainsaw Enthusiast
Freshly ported MS460 by CFB
Squish @ .022"
.025" off the flywheel key
OEM bearings, seals and gaskets.
Meteor Piston and Caber Rings.
OEM cylinder cleaned up nicely, but there is just 1 vertical scratch in the plating above the intake port, which shouldn't affect anything at all.
Piston has a couple smears from some small debris left in the case (my bad)
Mike cleaned it up and put on new Caber rings.
Small repair on air filter cover.
Any questions or concerns, feel free to PM either myself or @Canadian farm boy
Asking $750 USD plus actual shipping (guessing it will be around $55-70 insured for $800)
Squish @ .022"
.025" off the flywheel key
OEM bearings, seals and gaskets.
Meteor Piston and Caber Rings.
OEM cylinder cleaned up nicely, but there is just 1 vertical scratch in the plating above the intake port, which shouldn't affect anything at all.
Piston has a couple smears from some small debris left in the case (my bad)
Mike cleaned it up and put on new Caber rings.
Small repair on air filter cover.
Any questions or concerns, feel free to PM either myself or @Canadian farm boy
Asking $750 USD plus actual shipping (guessing it will be around $55-70 insured for $800)
