• Please be aware that we have recently gotten a wave of users that, when researched, are found to be from Nigeria. They are trying to sell products and asking to be paid through Zelle or Venmo leaving users with no recourse if they don't ship the product. If you suspect this activity please contact admin and we will research their information to verify their location.

ArboristSite.com Sponsors
Peak Industries


Cs2150 Jubilee

NIP Group
Ronie

Ronie

Addicted to ArboristSite
Joined
Dec 21, 2017
Messages
1,008
Age
53
Location
NC
 
cuinrearview

cuinrearview

Red saw lover
Joined
Oct 24, 2014
Messages
9,145
Age
43
Location
Hillsdale, MI
Thanks guys, next question. Bailey's has a 44mm kit and a 42mm kit listed for the 346 which one is best?
42 revs higher but likes a shorter bar. Nice saw for limbing wood up to about 10". 44.3 makes a little better all around saw. More peak and a wider powerband.
 
cuinrearview

cuinrearview

Red saw lover
Joined
Oct 24, 2014
Messages
9,145
Age
43
Location
Hillsdale, MI
I think I might go with the 44mm kit just for the single ring, I'm planning on porting it and I find a single ring is more simple.
You must be looking at aftermarket top ends. The 44.3mm and 42mm OEM pistons are both single ring. Everything I've talked about I was assuming you were talking OEM. If you buy aftermarket I can't help you. Sorry.
 
Top