mama
ArboristSite Operative
Had a friend give me a 266 xp with a scored piston, looks like the cylinder is scored pretty deep. E-bay has cylinder and piston kits for 169.00, is the saw worth fixing.
Had a friend give me a 266 xp with a scored piston, looks like the cylinder is scored pretty deep. E-bay has cylinder and piston kits for 169.00, is the saw worth fixing.
Had a friend give me a 266 xp with a scored piston, looks like the cylinder is scored pretty deep. E-bay has cylinder and piston kits for 169.00, is the saw worth fixing.
Had a friend give me a 266 xp with a scored piston, looks like the cylinder is scored pretty deep. E-bay has cylinder and piston kits for 169.00, is the saw worth fixing.
Yes the kit is aftermarket, made in Italy. I already have a partner S-65 with a 24 in B&C on it, doesn't seem to pull that size chain very well, maybe i need a skip chain. all of my other saws are in the 55 cc range so I would like a bigger saw that would cut good in big wood. I would replace the crank seals etc. The 266 xp is a closed port with a windowed piston so it should be a good cutter. Never had anything bigger in Husky than my 55 rancher. I'll keep everyone posted as to the progress.
Thanks for the Info, I might try and acid clean the cylinder and just put in a new piston and rings and see how it runs.
Thanks for the Info, I might try and acid clean the cylinder and just put in a new piston and rings and see how it runs.
Enter your email address to join: