Hello everyone. A friend gave me to look at his 555fx because it starts but runs at full throttle. I decided to investigate further, i found that the screw on the throttle carb linkage was missing and the carb throttle plate was in the intake. I removed the top end and discovered that the screw hit the piston, but the cylinder was ok. So i ordered a new carb and a new piston all OEM parts. I put them toghether and it started right up, but it doesnt run right. From cold it starts on 2 pulls of cord, but it boggs down when i try to give some throttle.
Here is a video to see how it runs
What could be the problem?
Here is a video to see how it runs
What could be the problem?