ArboristSite.com Sponsors
 
 


SOLD!!!! Jonsereds 621 for small/mid sized Husqvarna. PM me please.

Discussion in 'Chainsaws' started by Den, Jul 31, 2019.

  1. Den

    Den ArboristSite Operative

    Joined:
    Dec 17, 2015
    Messages:
    383
    Likes Received:
    134
    Location:
    Indiana
    Hi,
    Private message me with any correspondence or offers.
    Got a nice Jonsereds 621 that I'll trade for a small to mid sized Husqvarna. (As some may know, I'm on kind of a Husqvarna kick right now).
    Got a Tilton Super Bar on it, very clean condition, nothing appears to be broken or damaged, oiler works, it is missing the small cover over the spark plug.

    Anyway, I fueled up the Jonsereds about 2 weeks ago, added some Seafoam, and it fired right up. Idled, revved, and ran perfect. Ran it for about 20 minutes with no problems.
    Came back the other day, it fired right up and ran perfect for about 1 or 2 minutes then bogged and stalled. The plug was fouled.
    I cleaned the plug, started it right back up and ran excellent for about 1 or 2 minutes, then fouled the plug soaking wet with fuel/oil mix again.

    At this point, a carb kit, fuel line, and fuel filter are in order.

    Give me a few days to respond.

    And thanks.


    .
     

    Attached Files:

    WKEND LUMBERJAK and JohnnyBlade like this.
  2. Den

    Den ArboristSite Operative

    Joined:
    Dec 17, 2015
    Messages:
    383
    Likes Received:
    134
    Location:
    Indiana
    Forgot to mention, the silver rubber cushion on the top handle is in extremely nice condition.
     
    JohnnyBlade likes this.
  3. Den

    Den ArboristSite Operative

    Joined:
    Dec 17, 2015
    Messages:
    383
    Likes Received:
    134
    Location:
    Indiana
  4. Den

    Den ArboristSite Operative

    Joined:
    Dec 17, 2015
    Messages:
    383
    Likes Received:
    134
    Location:
    Indiana
    Sold it to an Indiana guy today.
     

Share This Page