So did some numbers.
Compression 90 psi
Squish 1mm
strato opens 91btdc close 81 atdc
intake open 77 btdc close 68 atdc
exhaust open 107 btdc close 118 atdc
transfers open 120 atdc close 130btdc
Compression I got 90 psi. I checked this against another machine and got same figures. Actually got 80psi off my good running machine. I’m assuming since it’s a fairly large squish and compression is not that high, this is an attempt to keep wear and tear down.
The above numbers are by no means scientific but are close enough.
Thoughts suggestions?
shave the jug for sure is on the list and as per previous, thoughts on removing the intake divider for the strato?
cheers