Ms261 I replaced the rim sprocket,drum, bearing.replaced the gas tank.bought what was supposed to be a good tank off eBay to find out it had a very small leak around the seam.used 2 coats of seal all and its good now.saw runs and cuts great.had to retune the high side was to lean for my liking.set it at 13600. Has a small chip by the oil cap hurts nothing.ill sell with bar and chain or without.$300 plus shipping PHO
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk