Tzed250
Addicted to ArboristSite
.
The saw looks good, sounds good, and cuts well!
.
The saw looks good, sounds good, and cuts well!
.
My 288xp/660 piston swap build...
- Thread starter TRI955
- Start date
Help Support Arborist Forum:
logging22
Cuttin to live, livin to cut
Have to see that saw in person to really see how beautiful it really is. Nicest 288 ever. Looked better than a new one out of the box. Great job Mike. Runs as good as it looks.
2000ssm6
Stihl User
Nice!
TRI955
I'm the man in the box
Gonna try her out this evening on a 30" Oak stump running 32" full skip. How much bar will this saw really take? Normally it will have 24" full comp on it.
Mike
Mike
parrisw
Tree Freak
Gonna try her out this evening on a 30" Oak stump running 32" full skip. How much bar will this saw really take? Normally it will have 24" full comp on it.
Mike
I once had a ported 288
, I then sold it, I had 28" and 36" for it, pulled a 36" fine.
TRI955
I'm the man in the box
It's official, this is my favorite saw now!!! This thing would walk all over the BB kitted 6401 Makita I had!! It just walked through the Oak stump like it was nothing, no bogging and rpms stayed up no problem. Turns out the tree was about 35" at the base, so bar was completely buried!!! I understand the big saw thing now!!!! So when is the next GTG?!?!?!!?
Mike
Mike
logging22
Cuttin to live, livin to cut
It's official, this is my favorite saw now!!! This thing would walk all over the BB kitted 6401 Makita I had!! It just walked through the Oak stump like it was nothing, no bogging and rpms stayed up no problem. Turns out the tree was about 35" at the base, so bar was completely buried!!! I understand the big saw thing now!!!! So when is the next GTG?!?!?!!?
Mike
Congrats on the saw Mike. Good stuff.
Great project,
Gotta love the ingenuity and the
hot rod saws.
Sounds great.
Lee
Gotta love the ingenuity and the
hot rod saws.
Sounds great.
Lee
TRI955
I'm the man in the box
I forgot to thank Rupedoggy for the OEM cylinder for the project, although, it sure would be nice with a decomp!!! 
Thanks again Rupe!!
Mike
Thanks again Rupe!!Mike
You're welcome. Mike
TRI955
I'm the man in the box
Had a chance to run a tank of fuel through the 288 yesterday, it really puts a smile on my face. Just checked the compression again, up to 207psi. I kinda hope it doesn't go up any more, I'm afraid I might have to run some better fuel. I'm just running 93 octane w/Stihl Ultra right now, don't wanna have to have special fuel for just one saw!
Mike
Mike
logging22
Cuttin to live, livin to cut
Had a chance to run a tank of fuel through the 288 yesterday, it really puts a smile on my face. Just checked the compression again, up to 207psi. I kinda hope it doesn't go up any more, I'm afraid I might have to run some better fuel. I'm just running 93 octane w/Stihl Ultra right now, don't wanna have to have special fuel for just one saw!
Mike
Holy crap Mike!! That kind of comp is crazy. I guess i need to check mine again. Ran it a little since the GTG. Maybe mine came up as well.
TRI955
I'm the man in the box
Holy crap Mike!! That kind of comp is crazy. I guess i need to check mine again. Ran it a little since the GTG. Maybe mine came up as well.
I'm starting to think a decomp valve might be a good thing, kinda rough on the recoil assy.!!!!
Mike
logging22
Cuttin to live, livin to cut
I'm starting to think a decomp valve might be a good thing, kinda rough on the recoil assy.!!!!
Mike
A little rough on the fingers too. Supercabs78 gave me a handle at the GTG that takes the rough out of it. Handle for a 460 "rescue". Big "D" handle. Works like a charm. Try it.
TRI955
I'm the man in the box
I have a couple Stihl elastostart handles around here, they're starting to look better all the time.
Mike
Mike
AUSSIE1
Al.
A decomp valve can drop your comp a tad also.
TRI955
I'm the man in the box
That might not be a bad thing at this point with only 1 tank of fuel through it! I would need to find a cylinder with the port on it...
logging22
Cuttin to live, livin to cut
ran3465
ArboristSite Operative
Hey looks great, I hope mine runs half as good as yours!
parrisw
Tree Freak
That's getting a little high eh!!
My 395 is 200psi, that was only after the 1st tank, wonder what it is now?? Do you get any run on?? With a big saw and real high compression it'll do that. Mine's a tad slow to come to idle when she gets hot.
My 395 is 200psi, that was only after the 1st tank, wonder what it is now?? Do you get any run on?? With a big saw and real high compression it'll do that. Mine's a tad slow to come to idle when she gets hot.
