adding coal....

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
knockbill

knockbill

Addicted to ArboristSite
. AS Supporting Member.
Joined
Aug 20, 2008
Messages
3,731
Location
se pa
has anyone used coal in their stove for an extended burn? a buddy was telling me he got a bucket of coal from a co worker to try,, he put a shovel or so on top of teh wood coals, and it burned overnight,,, he has a vc absolute...
i guess it would be more efficient if teh stove was set up for coal, and had a grate, but i was just wondering what experiences you guys had???
thanks...
 
loadthestove

loadthestove

ArboristSite Guru
Joined
Nov 10, 2009
Messages
974
Location
Southeastern Kentucky
Yes coal will hold a fire better than wood.But as mentioned it can damage your stove.I simply dont like the smell in my house.

Unless you have a coal mine on your property you will have to buy the coal.around here block coal sells for around $120 a ton and stoker coal goes for $150. a few years back I used a stoker furnace to heat my business.I would easily burn at least a ton a month.so if you burn any significant amount and had to buy it where would the savings be.

If I have to spend anything other than my labor on heat I will simply turn the thermostat up on my furnace
 
knockbill

knockbill

Addicted to ArboristSite
. AS Supporting Member.
Joined
Aug 20, 2008
Messages
3,731
Location
se pa
Yes coal will hold a fire better than wood.But as mentioned it can damage your stove.I simply dont like the smell in my house.

i think thats the answer i was thinking of... my old stove was a combo coal/wood stove, you used the grate for coal, but i never tried it...


If I have to spend anything other than my labor on heat I will simply turn the thermostat up on my furnace

thats my thoughts on wood burning,,, i can get all teh oak & maple i want right here in town for free,,, if i had to pay for it, i'd run teh gas furnace, a lot less work!!!

thanks for teh replies
 
fubar2

fubar2

Addicted to ArboristSite
Joined
Apr 8, 2005
Messages
6,108
Location
ohio
I would never burn coal over anything other than iron, iron shaker grates are best for it. I have seen what it does to steel grates and it ain't pretty, I can imagine what it would do to a steel stove bottom.
 
knockbill

knockbill

Addicted to ArboristSite
. AS Supporting Member.
Joined
Aug 20, 2008
Messages
3,731
Location
se pa
I would never burn coal over anything other than iron, iron shaker grates are best for it. I have seen what it does to steel grates and it ain't pretty, I can imagine what it would do to a steel stove bottom.

i don't think i've ever seen a steel stove without brick on teh bottom,,, the one i replaced was steel, and it was rated for coal or wood, but it had firebrick on teh bottom and sides,, i never tried it with coal, as i didn't have teh optional grate...
 
Streblerm

Streblerm

Addicted to ArboristSite
Joined
Mar 19, 2007
Messages
2,083
Location
Akron, OH
My dad burns a little bit of coal. He has shaker grates in his wood furnace though. I will root through the pile and pull out some bigger pieces occasionally. I don't pack the stove with them but I will throw a couple pieces on top of the fire.

They will burn completely that way, but a couple pieces of coal don't seem to extend the burn time at all. I don't notice significantly more heat than a good load of dry seasoned hardwood.

IMO it is not worth the hassle. If I were going to buy something to burn in a wood stove, I would look at the "bio blocks" or "eco bricks" which are blocks made of compressed sawdust. They are kind of like giant pellets.
 
micker30

micker30

New Member
Joined
Feb 13, 2011
Messages
2
Location
pa
using coal

I have a Crown royal Stove with grates in the bottom. I throw bucket of coal in everytime I check it. Then throw couple of logs on fire I get longer burn time and use less wood. Without the coal when it gets below zero I'm at the stove every 5 to 6 hours because it burns up all the wood. It seems that the coal gives me longer burns but the stove doesn't drop in temp. I also dropped my fan temp so the stove only drops 4 degrres instead of the normal 10 keeps fire burning.
 
savageactor7

savageactor7

ArboristSite Guru
Joined
Aug 26, 2008
Messages
833
Location
cny
Long time ago I burned coal in a coal stove that provided hot water as well. I was told I was pretty good at it cause there's a knack to it.

Fast forward to sometime in the 70's we got an r65 Shenandoah with grates that supposedly could do coal. Well I couldn't get the coal to burn in the stove for anything...and blamed it on the stove.

If I didn't have all this free wood I buy a coal stove and get coal a few tons at a time.

The coal I burned with success many years ago sat outside in the snow and rain on a concrete revetment. I didn't know the name of it but it was bulletproof to the elements.

Good luck with your coal fire...but first make sure your stove can handle it. Coal gets a lot hotter than wood.
 
trouba

trouba

ArboristSite Operative
Joined
Oct 7, 2008
Messages
233
Location
Eastern Iowa
Yep I have, but it was in a coal/wood stove. Mix it in with mostly wood and in the morning all that would be left would be some lumps of coal still burning. I would probable still burn some but its kinda hard to come by in Iowa.

 
Top