Hardest Saws to take apart or put back together.

[jbgorecom]

So what are some of the hardest saws to take apart or put back together????
Or to just repair.
Just curious, so I know the one's to stay away from.

anyone
JB

 

[bezza1]

So what are some of the hardest saws to take apart or put back together????
Or to just repair.
Just curious, so I know the one's to stay away from.

anyone
JB

th stihl clamshell saws the 290 , 310 , 390 i hate fixing them the 290 are a great little saw in my mind

 

[w8ye]

Homelite XL150

 

[Roll Tide]

201t

 

[Tzed250]

Mac110

 

[McCulloch1-52]

Mcculloch 33 or 35 I took a lot of saw apart the one that was a pain just to fix the recoil I had to take the carb off I never seen a carb like that but to get at the points was easy because was not under flywheel.


[video=youtube_share;Vc0d6t5D2-Q]http://youtu.be/Vc0d6t5D2-Q[/video]

 

[roostersgt]

Stihl 200t and Homelite Super 2. Clamshell Stihls (029/290/310/039/390) are a breeze. Time consuming yes, but at least the parts are accessible and not crammed together in an impossible fashion.

 

[blsnelling]

Craftsman/Roper 3.7!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[SilverKing]

Poulan 245 not fun to tear apart,but great saw.

 

[bezza1]

Stihl 200t and Homelite Super 2. Clamshell Stihls (029/290/310/039/390) are a breeze. Time consuming yes, but at least the parts are accessible and not crammed together in an impossible fashion.

yeah i forgot about the 192t they are a ####ing nightmare like my 190t

 

[blsnelling]

The 200T isn't bad at all. Now the 019 is another story!

 

[Overtrained]

Mac110

Yep, mini macs are a pain. If your not patient dont bother.

 

[gmax]

The Solo 610 clamshell

 

[Rokon]

Pain in the :censored: ass...020 AV

 

[booger1286]

I hated the homelite 330 when i replaced the intake boot. Just much more time consuming than it should be.

 

[Nardoo]

I will never do another 019T - ever!

 

[justtools]

The hardest saw to work on is the very first saw you ever took apart and reassembled without any help. After that each one gets a little easier.

 

[Andyshine77]

I'd say the mini macs are at the top of my list, as is the Remington 754. I don't find the 200T to be all that hard to work on, the linkage is goofy, but other than that pretty simple.

 

[promac850]

Hmm... seems that many here simply hate mini macs...

Time to port the hell out of two of them and get to work... run around the yard with one in each hand, arms flailing as you wildly prune some trees...

 

[SkippyKtm]

Stihl 200t and Homelite Super 2. Clamshell Stihls (029/290/310/039/390) are a breeze. Time consuming yes, but at least the parts are accessible and not crammed together in an impossible fashion.

I used to avoid working on the tiny 200T like the plague, but when the worth of the saw nearly doubled due to the unpopularity of the 201T, I changed my mind. I found out 200T's aren't so bad at all, once you have the first one under yer belt, the rest are easy peasy.